Hide Table of Contents
swsStrainComponent_e Enumeration

Strain components

.NET Syntax

Visual Basic (Declaration) 
Public Enum swsStrainComponent_e 
   Inherits System.Enum
Visual Basic (Usage) 
Dim instance As swsStrainComponent_e
C# 
public enum swsStrainComponent_e : System.Enum
C++/CLI 
public enum class swsStrainComponent_e : public System.Enum

Members

MemberDescription
swsStrainComponentE19 = Normal strain in the first principal direction
swsStrainComponentE210 = Normal strain in the second principal direction
swsStrainComponentE311 = Normal strain in the third principal direction
swsStrainComponentENERGY8 = Total strain energy
swsStrainComponentEPSX0 = Normal strain in the X direction of the selected reference geometry
swsStrainComponentEPSY1 = Normal strain in the Y direction of the selected reference geometry
swsStrainComponentEPSZ2 = Normal strain in the Z direction of the selected reference geometry
swsStrainComponentESTRN6 = Equivalent strain
swsStrainComponentGMXY3 = Shear strain in the Y direction in the YZ plane of the selected reference geometry
swsStrainComponentGMXZ4 = Shear strain in the Z direction in the YZ plane of the selected reference geometry
swsStrainComponentGMYZ5 = Shear strain in the Z direction in the XZ plane of the selected reference geometry
swsStrainComponentSEDENS7 = Strain energy density

Remarks

X, Y, Z directions correspond to the reference geometry. The first plane that appears in the FeatureManager design tree is used as the default reference geometry.

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   swsStrainComponent_e Enumeration
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2025 SP04

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.10