Interrupt Regeneration of Parts

Press Esc to interrupt the regeneration of parts. This also works with opening parts, rollbacks, and so on.

When you interrupt the regeneration of a part, the system completes regeneration of the current feature and then places the rollback bar after the feature.
Press the Esc key during these commands to exit the described processes. Status bar messages during a preview or main operation alert you that this functionality is available: Press <ESC> to cancel Preview or Press <ESC> to cancel <Combine/Intersect/Shell> command. Similar status bar messages appear for linear and circular patterns, fillets, and chamfers.
Command PropertyManager Actions That You Can Exit
Combine
  • Click Show Preview with the Add, Subtract, or Combine operation.
  • Click to start running the command.
Intersect
  • Click Intersect.
  • Click to start running the command.
Shell
  • Click Show Preview when you select a face or solid body.
  • Click to start running the command.
  • First click Show Preview then do one of the following:
    • Under Parameters, do one of the following:
      • Change the shell Thickness .
      • Select a face.
      • Select a solid body.
      • Select Shell outward.
    • Under Multi-thickness Settings, change the Multi-thickness(es) value or select a face.
Linear Pattern and Circular Pattern
  • Click to start running the command.
  • Select a feature or face.
  • Specify options under Direction 1 or Direction 2.
  • Specify a Preview type.
  • Select Instances to Skip.
  • Select Instances to Vary.
Fillet and Chamfer
  • Click to start running the command.
  • Select Items to Fillet or Items to Chamfer.
  • Specify a Preview type.

The software returns you to the PropertyManager state before clicking OK and remembers all settings.