Hide Table of Contents

Export Options - NASTRAN

  • Offsets:

    • Node Offset. Sets the node offset. The lowest node label in the generated file will be the specified node offset + 1.

    • Element Offset. Sets the element offset. The lowest element label in the generated file will be the specified element offset + 1.

  • Format:

    • Short Free. Short form, free format.

    • Long Free. Long form, free format

    • Short Fixed. Short form, fixed format.

    • Long Fixed. Long form, fixed format.

  • The drop-down menu sets the units of length to be used in exporting the model.

To export a study to MSC/NASTRAN:

  1. In the Simulation study tree, right-click the icon of the study and select Export.

  2. In the Save As dialog box:

    1. In the Save in field, browse to select a folder.

    2. In the File name field, enter a name for the file.

    3. From the Save as type menu, select NASTRAN files (*.dat).

    4. Click Options.

  3. In the Export Options - NASTRAN dialog box:

  1. Set the Node Offset and Element Offset, the format, and the unit system.

  2. Click OK.

  1. In the Save As dialog box, click Save.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Export Options - Nastran
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.26