Copying and Pasting Views
You can cut, copy, and paste
drawing views within a drawing, from one sheet to another in the same
drawing, and from one drawing document to another.
Model views are usually the most
useful to copy. You can modify them to display any view orientation.
You can also drag views from sheet to sheet within a drawing (but not
to another drawing document).
To perform these operations on multiple views at once, hold down the
Ctrl key as you select the views.
NOTE: To copy a Detail or Section
View from one drawing to another, you must also copy the parent view.
You can either copy the parent view first, or you can copy both the parent
and the Detail or Section View at the same time.
To cut/copy/paste a drawing view:
Select the view either on the sheet or in the
FeatureManager design tree.
Click Cut
or Copy on the Standard toolbar, or click Edit, Cut or Copy.
Change to the target sheet or drawing document,
click where you want to paste the view, and click Paste
on the Standard toolbar or click Edit, Paste.
To move or copy views by dragging:
In the FeatureManager
design tree:
To
move the view, drag the drawing view icon and drop it on the target sheet
icon (the pointer changes to when it is over the sheet
icon).
To
copy the view, hold down Ctrl,
then drag the drawing view icon and drop it on the target sheet icon (the
pointer changes to when it is over the sheet icon).