Hide Table of Contents

Defining Ply Thickness as a Parameter

You can define the thickness of each ply as a parameter. You can then use it as a variable in the Design Study.

  1. In the Simulation study tree, under the Parts folder, right-click a shell and select Edit Definition.
  2. In the PropertyManager, under Type, select Composite.
  3. Under Composite Options, in the Composite shell plies table, under Thickness, right click the cell for a ply and select Link Values.
  4. In the Parameters dialog box, click Edit/define.
  5. In the next Parameters dialog box that appears, click Add.
  6. In the Add Parameters dialog box:
    1. For Filter, select Mesh.
    2. For Type, select Length/Displacement/Ply thickness.
  7. For User defined value, type a value for ply thickness.

    You can change this value from a Design Study after you add the parameter as a variable.

  8. Click OK.
  9. In the Parameters dialog box, click OK.
  10. In the next Parameters dialog box, select the newly defined parameter and click OK.
  11. In the Shell Definition PropertyManager, click .

    The program defines the ply thickness of the selected ply as a parameter.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Defining Ply Thickness as a Parameter
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.