Hide Table of Contents

Hole Series (Middle Parts) PropertyManager

The Middle Parts are all the parts through which the Hole Series passes (between the first and last parts). If you add new components between the start and end components after you create the hole series, you can choose to include the new components in the hole series. You must edit the hole series to update it.

Middle Hole Specification

  • Auto size based on start hole. Sets the diameter for the middle parts by choosing the closest available hole size to the diameter of the first part. The available hole sizes depend on the selected screw type. If you change the Size (First Part PropertyManager, Start Hole Specification), the middle parts automatically update to match. Clear this option to set Custom Sizing.

  • Type. Select a drill type or screw clearance.

  • Size. Select a size for the fastener.

  • Fit. Select a fit for the fastener: Close, Normal, or Loose.

Custom Sizing

Sizing options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as diameter, depth, and angle.

You can override the value in the boxes. To revert to the default values, click Restore Default Values. The background color of the boxes is white for the default value, and yellow for the override value.

New Component(s)

(Available when you add new middle components to the hole series) From the list, select the middle components to include.

To add middle components to the hole series:

In this example, you created a hole series with the middle component suppressed. Now you want to include the middle component in the hole series.

  1. In the FeatureManager design tree, right-click the middle component and select Set to Resolved.

The middle component appears but is not included in the hole series.

  1. In the FeatureManager design tree, right-click the hole series feature and select Edit Feature.

  1. Select the Hole Series (Middle Parts) tab to open the PropertyManager.

  2. Expand New Component(s) to add the middle component to the hole series.

  3. Click .



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Hole Series (Middle Parts) PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.