Move-Copy-Rotate-Scale-Stretch PropertyManager
Move or Copy
Move
or Copy
entities by selecting from and to points or by using X
and Y destination coordinates.
Entities
to Move or Entities
to Copy .
Keep relations
Parameters
Sketch Type |
Parameters |
2D Sketch
3D Sketch On Plane |
|
3D Sketch |
|
When you copy sketch entities,
the dimensions and relations are copied to the new location.
Rotate
Rotate
entities by selecting a center of rotation and the number of degrees to
rotate.
Entities
to Rotate .
Keep relations
(see Move or Copy)
Parameters
Sketch Type |
Parameters |
2D Sketch
3D Sketch On Plane |
To rotate the sketch entities, drag one of the handles on the Rotate Point Defined icon.
|
3D Sketch
|
If sketch entities were selected when you
clicked Rotate, these items appear:
Rotation
Reference: Specifies a line within the selected entities around
which rotation occurs.
Rotation
Reference Angle: Specifies the angle to rotate the selected entities
around the rotation reference.
|
If no entities were selected:
When you click Rotation Reference
and then select a line, Rotation Reference
Angle appears and Rotation Origin
and Rotation Angle disappear.
To display Rotation Origin and
Rotation Angle again, right-click
Rotation Reference, and then select
Clear Selections.
|
Scale
Scale
and make copies of entities by selecting a Base
point , a Scale
Factor , and optionally, the number of copies.
Entities
to Scale .
Parameters
Scale
about. Sets a Base point as the point to scale about.
Scale
Factor . For example, specify 2
for double size, 0.5 for half
size, and so on.
Copy.
Creates one or more copies of the scaled entities.
To keep the original and
create scaled entities, select Copy.
Number
of Copies .
Stretch
Stretch
entities by selecting base points and dragging or by using X
and Y destination coordinates.
Entities
to Stretch .
Parameters
Repeat.
Stretches the entities again by the same distance.