Sketch Chamfer
The Sketch
Chamfer tool applies a chamfer to adjacent sketch entities in 2D
and 3D sketches. This tool is available for both 2D and 3D sketches. The
Chamfer
tool on the Features toolbar chamfers entities such as edges in parts.
To create a sketch chamfer:
In an open
sketch, click Sketch Chamfer on the Sketch toolbar, or click Tools, Sketch Tools,
Chamfer.
In the
PropertyManager, set the
as necessary.
-
In the graphics area, select
the two sketch entities to chamfer. To select the sketch entities, you
can:
The chamfer is applied immediately.
Click OK to accept the chamfer,
or click Undo to remove the chamfer.
You can undo a sequence of chamfers in reverse order.