Sets the options for result plots.
To display the dialog box, click . On the Default Options tab, click Plot.
Annotation and range
Show minimum value annotation |
If checked, the annotation for the minimum value of the plot is displayed. |
Show maximum value annotation |
If checked, the annotation for the maximum value of the plot is displayed.
|
Show range based on shown components only |
If checked, the result range in the legend applies to the shown part only and not to the whole model.
|
Settings options
Fringe options |
Sets the display for the fringe plot.
Point
|
Uses colored point contours.
|
Line
|
Uses colored line contours.
|
Discrete
|
Uses color-filled contours with discrete shading.
|
Continuous
|
Uses color-filled contours with smooth shading.
|
|
Boundary options |
None
|
Sets the display of the model boundary off.
|
Model
|
Displays the boundary edges of the model.
|
Mesh
|
Superimposes the selected result plot on the mesh plot.
|
Translucent (Single color)
|
Allows you to select a color and set the transparency level of the model.
|
Translucent (Part colors)
|
Allows you to set the transparency level of the model. Part colors are used.
|
|
Show excluded bodies
|
Translucent (Single color)
|
Displays excluded bodies in a single color of your choice. You can set the transparency level.
|
Translucent (Part colors).
|
Displays excluded bodies in their shaded mode colors. You can set the transparency level.
|
|
Show hidden bodies
|
Translucent (Single color)
|
Displays hidden bodies in a single color of your choice. You can set the transparency level.
|
Translucent (Part colors)
|
Displays hidden bodies in their shaded mode colors. You can set the transparency level.
|
|
Deformed shape options
Show results on undeformed shape |
The software displays results on the undeformed model.
|
Show results on deformed shape |
The software displays results on the deformed model. You can set the deformation scale factor to Automatic or True (1.0):
- all studies with "No penetration" contact
- studies with the "Large displacement" option
- all other studies
Use True scale to avoid false display of interfering parts after deformation.
|
Superimpose model on deformed shape |
If checked, the application displays the undeformed shape of the model on the deformed shape for structural studies using the following settings:
Translucent (part colors)
|
Allows you to set the transparency level of the model. Part colors will be used.
|
Translucent (single color)
|
Allows you to select a color by clicking on the color box and set the transparency level of the model.
|
|
Any changes to the above settings take effect for new plots only. They do not affect existing plots.
Beam diagram options
Transparency |
Default transparency level for beam diagrams. |