| Name | Description |
| AddVariablePitchHelixFirstPitchAndDiameter | Adds the first segment to a variable pitch helix. |
| AddVariablePitchHelixSegment | Adds a segment to a variable pitch helix. |
| CreateCoordinateSystem | Creates a coordinate system feature. |
| CreateCustomBendAllowance | Creates a custom bend allowance to use when creating a sheet metal feature. |
| CreateDefinition | Creates these feature data objects and uses their user-interface default settings: hole wizard and library. |
| CreateFeature | Creates these features by using their feature data objects: hole wizard and library. |
| CreateFormTool | Obsolete. Superseded by IFeatureManager::CreateFormTool2. |
| CreateFormTool2 | Creates a forming tool feature with the specified point of insertion in a sheet metal part. |
| CreateSaveBodyFeature | Create Save Bodies feature and create part and assembly documents of the Save Bodies solid bodies. |
| CreateStructuralMemberGroup | Creates a weldment structural-member group. |
| DraftXpertChange | Changes the parameters on the selected drafted faces, regardless of whether the drafted faces were created manually or with DraftXpert, provided that DraftXpert can process them. |
| DraftXpertRemove | Deletes the draft on the selected faces. If all the faces of a draft are selected, then this method deletes the draft feature; if not, then this method edits the draft feature and removes the selected face references from it. |
| EditDeleteFace | Edits a DeleteFace feature. |
| EditFreeze | Moves the freeze bar to the specified location in the FeatureManager design tree. |
| EditReferencePoint | Edits the selected reference points. |
| EditRollback | Rolls back or forward the rollback bar to a specific location in the FeatureManager design tree. |
| EndVariablePitchHelix | Ends and inserts a variable pitch helix. |
| FeatureBossThicken | Thickens the selected reference surface, and then generates a boss. |
| FeatureCircularPattern | Obsolete. Superseded by IFeatureManager::FeatureCircularPattern2. |
| FeatureCircularPattern2 | Obsolete. Superseded by IFeatureManager::FeatureCircularPattern3. |
| FeatureCircularPattern3 | Obsolete. Superseded by IFeatureManager::FeatureCircularPattern4. |
| FeatureCircularPattern4 | Inserts a circular-pattern feature. |
| FeatureCut | Obsolete. Superseded by IFeatureManager::FeatureCut2. |
| FeatureCut2 | Obsolete. Superseded by IFeatureManager::FeatureCut3. |
| FeatureCut3 | Creates a cut extrude feature. |
| FeatureCutThicken | Thickens the selected reference surface feature, and then generates a cut. |
| FeatureCutThin | Obsolete. Superseded by IFeatureManager::FeatureCutThin2. |
| FeatureCutThin2 | Inserts a thin cut extrude feature. |
| FeatureExtruRefSurface | Obsolete. Superseded by IFeatureManager::FeatureExtruRefSurface2. |
| FeatureExtruRefSurface2 | Inserts an extruded surface. |
| FeatureExtrusion | Obsolete. Superseded by IFeatureManager::FeatureExtrusion2. |
| FeatureExtrusion2 | Creates an extruded feature. |
| FeatureExtrusionThin | Obsolete. Superseded by IFeatureManager::FeatureExtrusionThin2. |
| FeatureExtrusionThin2 | Creates an extruded thin feature. |
| FeatureFillet | Creates an edge-fillet feature. |
| FeatureLinearPattern | Obsolete. Superseded by IFeatureManager::FeatureLinearPattern2. |
| FeatureLinearPattern2 | Obsolete. Superseded by IFeatureManager::FeatureLinearPattern3. |
| FeatureLinearPattern3 | Inserts a linear-pattern feature. |
| FeatureRevolve | Obsolete. Superseded by IFeatureManager::FeatureRevolve2. |
| FeatureRevolve2 | Creates a base, boss, or cut revolve feature. |
| FeatureRevolveCut | Obsolete. Superseded by IFeatureManager::FeatureRevolveCut2. |
| FeatureRevolveCut2 | Creates a revolved feature cut. |
| FeatureRevolveThin | Creates a revolved thin feature. |
| FeatureRevolveThinCut | Creates a revolved cut thin feature by revolving a profile about an axis. |
| FeatureSketchDrivenPattern | Creates a sketch-driven pattern feature. |
| FilletXpertChange | Changes the parameters on the selected filleted faces, regardless of whether the filleted faces were created manually or with FilletXpert, provided that FilletXpert can process them. |
| FilletXpertMakeCorner | Creates or changes a fillet corner feature. |
| FilletXpertRemove | Deletes the fillets on the selected faces. |
| GetFeatureCount | Gets the number of features in this document. |
| GetFeatures | Gets the features in this document. |
| GetFeatureTreeRootItem | Obsolete. Superseded by IFeatureManager::GetFeatureTreeRootItem2. |
| GetFeatureTreeRootItem2 | Gets the root item of the FeatureManager design tree in the specified pane. |
| GetFreezeLocation | Gets the location of the freeze bar in the FeatureManager design tree. |
| GetPreTrimmedBodies | Gets a temporary trimmed bodies using the specified target sheet (surface) body according to the trim tools previously defined by IFeatureManager::PreTrimSurface. |
| HideBodies | Hides both solid and surface bodies in the model. |
| HoleWizard | Obsolete. Superseded by IFeatureManager::HoleWizard2. |
| HoleWizard2 | Obsolete. Superseded by IFeatureManager::HoleWizard3. |
| HoleWizard3 | Obsolete. Superseded by IFeatureManager::HoleWizard4. |
| HoleWizard4 | Creates a hole using the hole wizard. |
| IFeatureFillet | Creates an edge-fillet feature. |
| IGetFeatures | Gets the features in this document. |
| IInsertCombineFeature | Combines the specified bodies in the multibody part to create a combined feature. |
| IInsertMacroFeature | Obsolete. Superseded by IFeatureManager::IInsertMacroFeature3. |
| IInsertMacroFeature2 | Obsolete. Superseded by IFeatureManager::IInsertMacroFeature3. |
| IInsertMacroFeature3 | Inserts a macro feature in this model. |
| IInsertMoveFace2 | Moves the selected faces on a solid or surface model. |
| IInsertReferencePoint | Creates the geometry for the reference points based on any of these selected entities: edges, faces, planes, vertices, or sketch geometry. |
| IInsertSheetMetalEdgeFlange2 | Inserts an edge flange in this sheet metal part. |
| IInsertTableDrivenPattern | Inserts a table-driven pattern of the selected features, faces, or bodies. |
| InsertCenterOfMass | Inserts a Center of Mass feature. |
| InsertCenterOfMassReferencePoint | Inserts a Center of Mass Reference Point feature. |
| InsertCombineFeature | Combines the specified bodies in the multibody part to create a combined feature. |
| InsertConnectionPoint | Adds a connection point based on the selected entities (see Remarks). |
| InsertConvertToSheetMetal | Obsolete. Superseded by IFeatureManager::InsertConvertToSheetMetal2. |
| InsertConvertToSheetMetal2 | Converts a solid or surface body into a sheet metal part. |
| InsertCoordinateSystem | Inserts a coordinate system feature. |
| InsertCosmeticThread | Obsolete. Superseded by IFeatureManager::InsertCosmeticThread2. |
| InsertCosmeticThread2 | Inserts a cosmetic thread. |
| InsertCosmeticWeldBead | Inserts a cosmetic weld bead feature for pre-selected faces. |
| InsertCrossBreak | Inserts a cross-break feature on the selected faces in a sheet metal part. |
| InsertCutBlend | Inserts a lofted cut based on the selected profiles, centerline, and guide curves. |
| InsertCutSurface | Inserts a surface-cut feature using the preselected surface or plane. |
| InsertCutSwept | Obsolete. Superseded by IFeatureManager::InsertCutSwept3. |
| InsertCutSwept2 | Obsolete. Superseded by IFeatureManager::InsertCutSwept3. |
| InsertCutSwept3 | Obsolete. Superseded by IFeatureManager::InsertCutSwept4. |
| InsertCutSwept4 | Inserts a sweep cut feature. |
| InsertDeleteBody | Inserts a deleted body. |
| InsertDerivedPattern | Creates a derived component from the selected pattern and seed components. |
| InsertDwgOrDxfFile | Obsolete. Superseded by IFeatureManager::InsertDwgOrDxfFile. |
| InsertDwgOrDxfFile2 | Inserts a DXF/DWG image feature. |
| InsertEdgeMerge | Merges multiple edges into a single edge using the selected faces when importing data. |
| InsertEndCapFeature | Inserts an end cap feature for the pre-selected open end of a structural member. |
| InsertEndCapFeature2 | Inserts an end cap feature using the specified end face of a structural member. |
| InsertFeatureChamfer | Inserts a chamfer. |
| InsertFeatureLock | Not implemented. |
| InsertFeatureTreeFolder | Obsolete. Superseded by IFeatureManager::InsertFeatureTreeFolder2. |
| InsertFeatureTreeFolder2 | |
| InsertFilletBeadFeature | Obsolete. Superseded by IFeatureManager::InsertFilletBeadFeature2. |
| InsertFilletBeadFeature2 | Inserts a fillet weld bead feature and also fills the gap between the pre-selected part bodies, if any. |
| InsertFilletBeadFeature3 | Inserts fillet weld bead features for the specified face sets. |
| InsertFillSurface | Obsolete. Superseded by IFeatureManager::InsertFillSurface2. |
| InsertFillSurface2 | Inserts a fill-surface feature in the model. |
| InsertFlexFeature | Inserts a Flex feature using the selected solid or surface body. |
| InsertFormToolFeature | Inserts a forming tool from the Design Library into a sheet metal part. |
| InsertFreeform | Obsolete. Superseded by IFeatureManager::InsertFreeform2. |
| InsertFreeform2 | Inserts a Freeform feature. |
| InsertGridFeature | Inserts a Grid System feature. |
| InsertGussetFeature | Inserts a gusset feature for pre-selected faces. |
| InsertGussetFeature2 | Inserts a gusset feature for the specified faces. |
| InsertIndent | Inserts an indent feature. |
| InsertLiveSectionPlane | Inserts a Live Section Plane using the selected plane or planar face. |
| InsertMacroFeature | Obsolete. Superseded by IFeatureManager::InsertMacroFeature3. |
| InsertMacroFeature2 | Obsolete. Superseded by IFeatureManager::InsertMacroFeature3. |
| InsertMacroFeature3 | Inserts a macro feature in this model. |
| InsertMateReference | Obsolete. Superseded by IFeatureManager::InsertMateReference2. |
| InsertMateReference2 | Inserts a mate reference for a part or assembly document. |
| InsertMidSurface | Inserts a midsurface feature. |
| InsertMirrorFeature | Obsolete. Superseded by IFeatureManager::InsertMirrorFeature2. |
| InsertMirrorFeature2 | Mirrors selected features, faces, and bodies about a selected plane or planar face. |
| InsertMoldCoreCavitySolids | Creates a core/cavity solid feature. |
| InsertMoldPartingLine | Inserts a mold parting line feature. |
| InsertMoldPartingSurface | Inserts a mold parting surface feature. |
| InsertMoldShutOffSurface | Inserts the mold shut-off surface feature. |
| InsertMoveCopyBody | Obsolete. Superseded by IFeatureManager::InsertMoveCopyBody2. |
| InsertMoveCopyBody2 | Moves, rotates, and makes copies of the selected solid bodies or surfaces. |
| InsertMoveFace | Obsolete. Superseded by IFeatureManager::InsertMoveFace2 and IFeatureManager::IInsertMoveFace2. |
| InsertMoveFace2 | Moves the selected faces on a solid or surface model. |
| InsertMultiFaceDraft | Inserts a multiface draft feature. |
| InsertNetBlend | This method inserts a boundary feature. |
| InsertProtrusionBlend | Obsolete. Superseded by IFeatureManager::InsertProtrusionBlend2. |
| InsertProtrusionBlend2 | Creates a lofted body or boss from the selected profiles, centerline, and guide curves. |
| InsertProtrusionSwept | Obsolete. Superseded by IFeatureManager::InsertProtusionSwept3. |
| InsertProtrusionSwept2 | Obsolete. Superseded by IFeatureManager::InsertProtusionSwept3. |
| InsertProtrusionSwept3 | Inserts a swept boss or base feature using the selected profile and sweep curves. |
| InsertReferencePoint | Creates the geometry for the reference points based on any of these selected entities: edges, faces, planes, vertices, or sketch geometry. |
| InsertRefPlane | Inserts a constraint-based reference plane using the selected reference entities. |
| InsertRevolvedRefSurface | Creates a revolved reference surface by revolving a profile around a centerline. |
| InsertRib | Inserts rib. |
| InsertRuledSurfaceFromEdge | Obsolete. Superseded by IFeatureManager::InsertRuledSurfaceFromEdge2. |
| InsertRuledSurfaceFromEdge2 | Inserts a ruled surface from the selected edge on this feature. |
| InsertSaveOutBodies | Saves the selected surface bodies or solid bodies or sub-weldments to a file. |
| InsertScale | Inserts a feature that applies a scaling factor to the model. |
| InsertSecurityNote | Inserts a note for the specified macro feature. |
| InsertSewRefSurface | Creates a surface by knitting the selected surfaces together. |
| InsertSheetMetal3dBend | Inserts a 3D bend in sheet metal part. |
| InsertSheetMetalBaseFlange | Obsolete. Superseded by IFeatureManager::InsertSheetMetalBaseFlange2. |
| InsertSheetMetalBaseFlange2 | Inserts a sheet metal base flange feature. |
| InsertSheetMetalCornerTrim | Inserts a break corner trim in the sheet metal part. |
| InsertSheetMetalEdgeFlange | Obsolete. Superseded by IFeatureManager::InsertSheetMetalEdgeFlange2. |
| InsertSheetMetalEdgeFlange2 | Inserts an edge flange in this sheet metal part. |
| InsertSheetMetalHem | Obsolete. Superseded by IFeatureManager::InsertSheetMetalHem2. |
| InsertSheetMetalHem2 | Inserts a hem of the specified relief type at the selected edges of the current sheet metal part. |
| InsertSheetMetalLoftedBend | Inserts a lofted bend in a sheet metal part. |
| InsertSheetMetalMiterFlange | Inserts a meter flange in a sheet metal part. |
| InsertSplitLineIntersect | Creates split lines using the selected intersecting tool and target entities. |
| InsertStructuralWeldment | Obsolete. Superseded by IFeatureManager::InsertStructuralWeldment2. |
| InsertStructuralWeldment2 | Obsolete. Superseded by IFeatureManager::InsertStructuralWeldment3. |
| InsertStructuralWeldment3 | Obsolete. Superseded by IFeatureManager::InsertStructuralWeldment4. |
| InsertStructuralWeldment4 | Inserts a structural weldment feature using the specified structural-member groups. |
| InsertSubFolder | Creates a subfolder in the Solid Bodies folder in the FeatureManager design tree and moves the selected solid bodies or subfolders in the Solid Bodies folder to the new subfolder. |
| InsertSubWeldFolder | Creates a sub weld folder feature containing solid bodies that are pre-selected in the user interface. |
| InsertSubWeldFolder2 | Creates a sub weld folder feature containing the specified weldment bodies. |
| InsertSweepSurface | Obsolete. Superseded by IFeatureManager::InsertSweepSurface2. |
| InsertSweepSurface2 | Creates a reference surface by sweeping the selected profile along the selected sweep curves. |
| InsertTableDrivenPattern | Inserts a table-driven pattern of the selected features, faces, or bodies. |
| InsertUntrimSurface | Inserts an untrimmed surface to patch surface holes and external edges by extending an existing surface along its natural boundaries. |
| InsertVariablePitchHelix | Starts a variable pitch helix using the selected sketch containing an arc. |
| InsertVaryInstanceIncrement | Applies the specified increment to the specified pattern instance dimension or spacing. |
| InsertVaryInstanceOverride | Applies the specified override to the specified dimension or spacing of the pattern instance at the specified position. |
| InsertWeldmentCutList | Inserts a cut-list-item folder feature containing pre-selected weldment bodies. |
| InsertWeldmentCutList2 | Inserts a cut-list-item folder feature containing the specified weldment bodies. |
| InsertWeldmentFeature | Inserts a weldment feature. |
| InsertWeldmentTrimFeature | Inserts a weldment trim feature. |
| InsertWeldmentTrimFeature2 | Inserts a weldment trim feature for the specified weldment bodies or faces. |
| InsertWrapFeature | Inserts a wrap feature using the selected sketch, pull direction, and nonplanar face. |
| IsNameUsed | Checks to see whether the specified name is unique in the FeatureManager design tree and valid to use. |
| MakeStyledCurves | Obsolete. Superseded by IFeatureManager::MakeStyledCurves2. |
| MakeStyledCurves2 | Fits a spline to the preselected sketch segments to make a smooth edge on the model. |
| MoldUndercutDetect | Obsolete. Superseded by IFeatureManager::MoldUndercutDetect2. |
| MoldUndercutDetect2 | Detects trapped, also called undercut, areas in a model that cannot be ejected from the mold. |
| MoveRotateLiveSectionPlane | Moves or rotates the selected Live Section Plane using the selected Live Section Plane and its manipulator. |
| MoveToFolder | Moves the selected feature or folder in the Solid Bodies Feature Manager design tree structure to the specified folder in the Solid Bodies Feature Manager design tree structure. |
| PostSplitBody | Inserts a split-body feature. |
| PostTrimSurface | Sets whether to sew the resulting trimmed surfaces. |
| PreSplitBody | Gets the bodies that result from splitting the body when creating a split-body feature. |
| PreTrimSurface | Sets the trimming options before trimming a surface. |
| SetFreeformBoundaryContinuity | Sets the boundary continuity for this Freeform feature. |
| SetFreeformCurveData | Adds a curve to the pre-selected face for a Freeform feature. |
| SetFreeformPointData | Adds a point to a curve for a Freeform feature. |
| SetNetBlendCurveData | Sets the data for a curve for this boundary feature. |
| SetNetBlendDirectionData | Sets the curve set data (one for each of the two directions) for this boundary feature. |
| ShowBodies | Shows both hidden solid and surface bodies. |
| SimpleHole | Obsolete. Superseded by IFeatureManager::SimpleHole2. |
| SimpleHole2 | Inserts a simple hole feature. |
| UpdateFeatureTree | Updates the FeatureManager design tree. |