Hide Table of Contents

Structural Member PropertyManager

To open the Structural Member PropertyManager:

Add or edit a structural member in a weldment part.

You can set the default color for Structural Member features in Model Display Options.

Selections

Specify the profile of the structural member by selecting a standard, type, and size.

Standard Select iso, ansi inch, or a custom standard that you previously defined.
Type Select a Profile Type, such as angle iron or square tube.
Sample profile types:

weldments_profile_01.gif
angle iron
weldments_profile_03.gif
rectangular tube

weldments_profile_02.gif
pipe
weldments_profile_04.gif
c channel
Size Select a Profile, such as 20 x 20 x 3.
Additional weldment profiles are available on the Design Library tab tab_Design_Library.gif. Under SolidWorks Content Open_in_SW.gif, in the Weldments folder, Ctrl + click items to download .zip files.
Merge arc segment bodies (For curved entities only.) Select to merge arc segment bodies with adjacent bodies in the structural member. Clear to create a separate body for each curved entity. The arc segment and adjacent bodies must be tangent in order to merge.
 
weldment_curve_01.gif weldment_curve_02.gif
Selected

One structural member, one solid body.

 Cleared

One structural member, five solid bodies.
Groups Select a group to configure under Settings.
New Group Creates a new group in this structural member.

Settings

Configure the selected group:

  Path segments Lists the segments in the group.
  Apply corner treatment (Available for contiguous groups only.) Defines how to trim segments of the group when they intersect at corners. You can clear Apply corner treatment and specify a corner treatment later (for example, when you trim the structural members). You can also modify the corner treatment, allowing you to specify multiple corner treatments per group.
weldment_cornertype_endmiter.gif weldment_cornertype_endbutt1.gif weldment_cornertype_endbutt2.gif
End Miter PM_weldments_corner_miter.gif End Butt1 PM_weldments_corner_butt_h.gif End Butt2 PM_weldments_corner_butt_v.gif
  Merge miter trimmed bodies (Available when you select Apply corner treatment and click End Miter PM_weldments_corner_miter.gif.) Combines weld member bodies so that the length of the resulting weld member body in the weldment cut list is equal to the sum of the maximum lengths of the uncut weld member bodies.
PM_weldment_gap1.gif Gap between Connected Segments in Same Group (Available for contiguous groups only.) Specify the weld gap at the corners of segments in the same group.
PM_weldment_gap2.gif Gap between Different Group Segments Specify the weld gap where the ends of this group's segments abut segments in another group.
   
Specifying a weld gap shortens segment lengths, as reflected in the cut list, and retains the overall extent of each segment.
  Allow protrusion Allows the structural member to extend the length of the sketch. This is helpful when one structural member (A) is used to trim another member (B), but A does not fully cut B. It allows the portion of B that is not cut by A to extend to the length of the sketch.
  Mirror Profile Flips the profile of the group about its Horizontal Axis or Vertical Axis.
  Alignment Aligns an axis of the group profile to any selected vector (edge, construction line, etc.). Select which axis of the profile to align:
  • Horizontal axis
  • Vertical axis
PM_angle.gif Rotation Angle Rotates the structural member by a set number of degrees.
  Locate Profile Zooms to the profile so you can change its pierce point relative to the sketch segment. The default pierce point is the sketch origin.

Configurations

Select the configurations to apply to the structural member:
  • This configuration
  • All configurations
  • Specify configurations

Contents



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Structural Member PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.26