To create an extrude feature:
- Create a sketch.
You can use a closed profile sketch or an open profile. For cuts, open profile sketches are only valid for Blind or Through All end conditions
- Click one of the extrude tools:
|
Extruded Boss/Base |
on the Features toolbar, or click
|
|
Extruded Cut |
on the Features toolbar, or click |
|
Extruded Surface |
on the Surfaces toolbar, or click |
- Set the PropertyManager options.
To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All - Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature. When you drag the manipulator to set the size, an Instant3D ruler appears so you can set precise values.
- Click .