Hide Table of Contents

Using the Tag Scheme Manager

  1. Do one of the following:
    • Click Tools > Routing > Routing Tools > Routing Library Manager , and click Tag Scheme Manager .
    • From the Windows Start menu, click All Programs > SOLIDWORKS version > SOLIDWORKS Tools > SOLIDWORKS version Routing Library Manager > Tag Scheme Manager .
  2. For Scheme name, type a name for the scheme.
  3. Click Create Scheme.
  4. In Scheme view, select the scheme name from step 3.
  5. In Tag scheme type, select the scheme type.
  6. For Enter an example tag, type a sample tag that is used in the P&ID file.
  7. Under Define fields:
    1. In Field name, select the type of field for the specific subtag you are defining, or select Custom and type a Custom field name.
    2. Under Field delimiter, select either:
    • Specific character, and type the delimiter character. Select Include delimiter only if the delimiter is required to interpret the subtag.
    • Number of characters to define the length of the subtag.
  8. In Field data, verify that the subtag you defined is correct. If it is incorrect, modify your selections under Field delimiter.
  9. Click Add to Tag.

    The subtag you defined appears in blue in Example tag field values and under Scheme view.

  10. Repeat steps 7 through 9 for the remaining subtags in the tag. Define each subtag in sequence, according to the order in which it appears in the tag.
  11. Click Save.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Using the Tag Scheme Manager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.48