Expand IntroductionIntroduction
Expand AdministrationAdministration
Expand User InterfaceUser Interface
Expand SOLIDWORKS FundamentalsSOLIDWORKS Fundamentals
Expand Moving from 2D to 3DMoving from 2D to 3D
Expand AssembliesAssemblies
Expand CircuitWorksCircuitWorks
Expand ConfigurationsConfigurations
Expand SOLIDWORKS CostingSOLIDWORKS Costing
Expand Design CheckerDesign Checker
Expand Design Studies in SOLIDWORKSDesign Studies in SOLIDWORKS
Expand Detailing and DrawingsDetailing and Drawings
Expand DFMXpressDFMXpress
Expand DriveWorksXpressDriveWorksXpress
Expand FloXpressFloXpress
Expand SLDXML Data ExchangeSLDXML Data Exchange
Expand Import and ExportImport and Export
Expand Model DisplayModel Display
Expand Mold DesignMold Design
Expand Motion StudiesMotion Studies
Expand Parts and FeaturesParts and Features
Expand RoutingRouting
Expand Sheet MetalSheet Metal
Expand SimulationSimulation
Expand SimulationXpressSimulationXpress
Collapse SketchingSketching
Expand SketchSketch
Sketch Settings Menu
Using No Solve Move
Sketch Complexity
Working in a Sketch
Inferencing
Sketch Modes
Autotransitioning
Selecting Contours
Exiting Sketches
Snaps
Expand Sketch OptionsSketch Options
Expand Sketch EntitiesSketch Entities
Expand Sketch ToolsSketch Tools
Expand BlocksBlocks
Expand SplinesSplines
Expand 3D Sketching3D Sketching
Collapse Dimensions and RelationsDimensions and Relations
Dimensions/Relations Toolbar and Menus
Collapse DimensionsDimensions
Preselection of Entities for Smart Dimensioning
Dimensioning a 2D Sketch
Modifying a 2D Sketch Dimension with Instant2D
Maintaining Proportions in a Sketch Profile
Creating Horizontal Dimensions
Creating Vertical Dimensions
Locking Dimensions
Expand Angular DimensionsAngular Dimensions
Creating Arc Dimensions
Creating Path Length Dimensions
Creating Dimensions Between Two Points
Formatting Dimensions in Parts and Sketches
Inserting Driven Dimensions
Setting Multiple Dimensions to Driven
Expand Dimensions Between Arcs or CirclesDimensions Between Arcs or Circles
Dimensioning Two Points of the Same Arc
Displaying Dimensions
Using Centerlines to Create Radial and Diametric Dimensions
Sketch Geometry Status
Sketch Status Conventions
Expand Resolving Over Defined SketchesResolving Over Defined Sketches
Expand Fully Defined SketchesFully Defined Sketches
Creating Zero and Negative Value Dimensions
Displaying a Ghost Image of a Missing Sketch Entity
Expand RelationsRelations
Expand SOLIDWORKS MBDSOLIDWORKS MBD
Expand SOLIDWORKS UtilitiesSOLIDWORKS Utilities
Expand SOLIDWORKS SustainabilitySOLIDWORKS Sustainability
Expand TolerancingTolerancing
Expand TolAnalystTolAnalyst
Expand ToolboxToolbox
Expand WeldmentsWeldments
Expand Workgroup PDMWorkgroup PDM
Expand TroubleshootingTroubleshooting
Glossary
Hide Table of Contents

Dimensioning a 2D Sketch

You dimension 2D or 3D sketch entities with the Smart Dimension tool. You can drag or delete a dimension while the Smart Dimension tool is active.

Dimension types are determined by the sketch entities you select. For some types of dimensions (point-to-point, angular, circular), the location where you place the dimension also affects the type of dimension that is added.
You can create features without adding dimensions to sketches. However, it is good practice to dimension sketches. Dimension in accordance with the model's design intent; for example, you might want to dimension holes a certain distance from an edge, or else a certain distance from each other.
There are several automated tools associated with dimensions and relations. You can let the SOLIDWORKS application:
  • Fully define sketches
  • Resolve over-defined sketches

To add a dimension to a sketch or drawing:

  1. Click Smart Dimension Tool_Smart_Dimensions_Relations.gif on the Dimensions/Relations toolbar, or click Tools > Dimensions > Smart . The default dimension type is Parallel.
    Optionally, you can choose a different dimension type from the shortcut menu. Right-click the sketch, and select More Dimensions. Choose from Horizontal, Vertical, Ordinate, Horizontal Ordinate, or Vertical Ordinate. If you are editing a drawing view, you have additional choices of Baseline and Chamfer.
  2. Select the items to dimension, as shown in the table below.
    You can undo previous selections by pressing Esc. For example, when dimensioning multiple entities using the Smart Dimension Tool_Smart_Dimensions_Relations.gif tool, you can press Esc to undo the last selection. This is helpful if you accidentally select an entity that you did not want to dimension.
    As you move the pointer, the dimension snaps to the closest orientation.
  3. Click to place the dimension.
    To dimension the... Click... Note:
    Length of a line or edge The line.  
    Angle between two lines Two lines, or a line and a model edge. Placement of the dimension affects the way the angle is measured.

    Video: Dimensioning the Angle Between Two Lines

    Distance between two lines Two parallel lines or a line and a parallel model edge.  
    Perpendicular distance from a point to a line The point and the line or model edge.  
    Distance between two points Two points. One of the points can be a model vertex.
    These distance dimensions were all created by selecting the same two points, then selecting a different location for each dimension:
    P2PDIM1.gif
    P2PDIM2.gif
    P2PDIM3.gif

    Video: Dimensioning Point-to-Point

    Radius of an arc The arc.  
    True length of an arc The arc, then the two end points. Video: Dimensioning Arc Length
    Diameter of a circle The circumference. Displayed as linear or diameter, depending on placement.

    Video: Dimensioning a Circle

    Distance when one or both entities is an arc or a circle The centerpoint or the circumference of the arc or circle, and the other entity (line, edge, point, etc.). By default, distance is measured to the centerpoint of the arc or circle, even when you select the circumference.
    Midpoint of a linear edge Right-click the edge whose midpoint you want to dimension and click Select Midpoint. Then select the second entity to dimension. You can also dimension to midpoints when you add baseline or ordinate dimensions.
    The doubled distance between a sketch entity and centerline The sketch entity, then the centerline. Then drag the pointer to the opposite side of the centerline. Doubled distance relations create a value that is twice the distance of the sketch entity to the centerline. These relations help you determine the equal distance to the other side of the centerline. Doubled distance relations are helpful when you create profile sketches for revolved features.

    Video: Dimensioning Doubled Distance

    The dimension shortcut menu provides Display Options. The choices available depend on the type of dimension and other factors and may include the following:
    • Show Parentheses
    • Dual dimension
    • Show as Inspection


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Dimensioning a 2D Sketch
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.