© 1995-2018, Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE
company, 175 Wyman Street, Waltham, Mass. 02451 USA. All Rights Reserved.
The information and the software discussed in this document are subject to
change without notice and are not commitments by Dassault Systemes SolidWorks Corporation (DS
SolidWorks).
No material may be reproduced or transmitted in any form or by any means, electronically or
manually, for any purpose without the express written permission of DS SolidWorks.
The software discussed in this document is furnished under a license and may be used or
copied only in accordance with the terms of the license. All warranties given by DS SolidWorks
as to the software and documentation are set forth in the license agreement, and nothing
stated in, or implied by, this document or its contents shall be considered or deemed a
modification or amendment of any terms, including warranties, in the license agreement.
Patent Notices
SOLIDWORKS® 3D mechanical CAD and/or Simulation software is protected
by U.S. Patents 6,611,725; 6,844,877; 6,898,560; 6,906,712; 7,079,990; 7,477,262; 7,558,705;
7,571,079; 7,590,497; 7,643,027; 7,672,822; 7,688,318; 7,694,238; 7,853,940; 8,305,376;
8,581,902; 8,817,028; 8,910,078; 9,129,083; 9,153,072; 9,262,863; 9,465,894; 9,646,412;
9,870,436; 10,055,083; and foreign patents, (e.g., EP 1,116,190 B1 and JP 3,517,643).
eDrawings® software is protected by U.S. Patent 7,184,044; U.S. Patent
7,502,027; and Canadian Patent 2,318,706.
U.S. and foreign patents pending.
Trademarks and Product Names for SOLIDWORKS Products and
Services
SOLIDWORKS, 3D ContentCentral, 3D PartStream.NET, eDrawings, and the eDrawings logo are
registered trademarks and FeatureManager is a jointly owned registered trademark of DS
SolidWorks.
CircuitWorks, FloXpress, PhotoView 360, and TolAnalyst are trademarks of DS SolidWorks.
FeatureWorks is a registered trademark of HCL Technologies Ltd.
SOLIDWORKS 2018, SOLIDWORKS Standard, SOLIDWORKS Professional, SOLIDWORKS
Premium, SOLIDWORKS PDM Professional, SOLIDWORKS PDM Standard, SOLIDWORKS Simulation
Standard, SOLIDWORKS Simulation Professional, SOLIDWORKS Simulation Premium, SOLIDWORKS Flow
Simulation, eDrawings Viewer, eDrawings Professional, SOLIDWORKS Sustainability, SOLIDWORKS
Plastics, SOLIDWORKS Electrical Schematic Standard, SOLIDWORKS Electrical Schematic
Professional, SOLIDWORKS Electrical 3D, SOLIDWORKS Electrical Professional, CircuitWorks,
SOLIDWORKS Composer, SOLIDWORKS Inspection, SOLIDWORKS MBD, SOLIDWORKS PCB powered by
Altium, SOLIDWORKS PCB Connector powered by Altium, and SOLIDWORKS Visualize are product
names of DS SolidWorks.
Other brand or product names are trademarks or registered trademarks of their respective
holders.
COMMERCIAL COMPUTER SOFTWARE - PROPRIETARY
The Software is a "commercial item" as that term is defined at 48 C.F.R. 2.101 (OCT 1995),
consisting of "commercial computer software" and "commercial software documentation" as such
terms are used in 48 C.F.R. 12.212 (SEPT 1995) and is provided to the U.S. Government (a) for
acquisition by or on behalf of civilian agencies, consistent with the policy set forth in 48
C.F.R. 12.212; or (b) for acquisition by or on behalf of units of the Department of Defense,
consistent with the policies set forth in 48 C.F.R. 227.7202-1 (JUN 1995) and 227.7202-4 (JUN
1995)
In the event that you receive a request from any agency of the U.S. Government to provide
Software with rights beyond those set forth above, you will notify DS SolidWorks of the scope
of the request and DS SolidWorks will have five (5) business days to, in its sole discretion,
accept or reject such request. Contractor/Manufacturer: Dassault Systemes SolidWorks
Corporation, 175 Wyman Street, Waltham, Massachusetts 02451 USA.
Copyright Notices for SOLIDWORKS Standard, Premium, Professional, and
Education Products
Portions of this software © 1986-2018 Siemens Product Lifecycle Management Software Inc.
All rights reserved.
This work contains the following software owned by Siemens Industry Software Limited:
D-Cubed® 2D DCM © 2018. Siemens Industry Software Limited. All Rights
Reserved.
D-Cubed® 3D DCM © 2018. Siemens Industry Software Limited. All Rights
Reserved.
D-Cubed® PGM © 2018. Siemens Industry Software Limited. All Rights
Reserved.
D-Cubed® CDM © 2018. Siemens Industry Software
Limited. All Rights Reserved.
D-Cubed® AEM © 2018. Siemens Industry Software Limited. All Rights
Reserved.
Portions of this software © 1998-2018 HCL Technologies Ltd.
Portions of this software incorporate PhysX™ by NVIDIA 2006-2010.
Portions of this software © 2001-2018 Luxology, LLC. All rights reserved, patents
pending.
Portions of this software © 2007-2018 DriveWorks Ltd.
© 2011, Microsoft Corporation. All rights reserved.
Includes Adobe® PDF Library technology.
Copyright 1984-2016 Adobe Systems Inc. and its licensors. All rights reserved. Protected by
U.S. Patents.5,929,866; 5,943,063; 6,289,364; 6,563,502; 6,639,593; 6,754,382; Patents
Pending.
Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, Distiller and Reader are registered
trademarks or trademarks of Adobe Systems Inc. in the U.S. and other countries.
For more DS SolidWorks copyright information, see .
Copyright Notices for SOLIDWORKS Simulation Products
Portions of this software © 2008 Solversoft Corporation.
PCGLSS © 1992-2017 Computational Applications and System Integration, Inc. All rights
reserved.
Copyright Notices for SOLIDWORKS PDM Professional Product
Outside In® Viewer Technology, © 1992-2012 Oracle
© 2011, Microsoft Corporation. All rights reserved.
Copyright Notices for eDrawings Products
Portions of this software © 2000-2014 Tech Soft 3D.
Portions of this software © 1995-1998 Jean-Loup Gailly and Mark Adler.
Portions of this software © 1998-2001 3Dconnexion.
Portions of this software © 1998-2017 Open Design Alliance. All rights
reserved.
The eDrawings® for Windows® software is based in
part on the work of the Independent JPEG Group.
Portions of eDrawings® for iPad® copyright ©
1996-1999 Silicon Graphics Systems, Inc.
Portions of eDrawings® for iPad® copyright © 2003
– 2005 Apple Computer Inc.
Copyright Notices for SOLIDWORKS PCB Products
Portions of this software © 2018 Altium Limited.