Orienting a Model to XYZ Coordinates

You can use the Normal To command to orient a model normal to the nearest global XYZ coordinates...To orient a model normal to the nearest global XYZ coordinates...For more information on the Normal To command, see Orientation

Orientation

Click Normal To (View Orientation flyout &#8211 Heads-up View toolbar...If you click Normal To again, the model flips 180 &#176 See Orienting a Model to XYZ Coordinates for another way to display a model in Normal To view...Click Normal To (View Orientation flyout &#8211 Heads-up View toolbar...

Measure

Projection and Normal are not calculated...The software calculates the projected distance (on the plane you select), and the normal distance (normal to the plane you select...Projection and Normal appear in the Measure dialog box

Plane PropertyManager

Two options appear in the PropertyManager: Nearest location on surface and Along sketch normal...Along sketch normal selected...The new plane is created at the point on the surface obtained by projecting the sketch point normal to the plane on

Assemblies Options

Set options for normal use (with Large Assembly Mode off) as...Disables automatic save of your model. (Set in Backup Options for normal use...

Sketch Options

To set a low transparency, click Tools Options System Options Performance and clear High quality for normal view mode

Perspective

... view of the model. A perspective view is the view normally seen by the eye. Parallel lines recede ...

Camera PropertyManager

If a face or plane is selected, a line normal to the plane defines the up direction...Add perspective (the view that the eye normally sees) to the camera view

Performance Options

... when Large Assembly Mode is on.) High quality for normal view mode. While the part or assembly is ...