Video_Camera Normal To

Two fixed normal motions

Two fixed normal motions

Normal Cut

When adding a cut to a folded sheet metal part, select Normal cut to ensure that the cut is created normal to the sheet metal thickness...Normal cut is...both models, but Normal cut is selected in the top model

Normal To Command

You can use the Normal To command to orient a model normal to the nearest global XYZ coordinates...To orient a model normal to the nearest global XYZ coordinates...For more information on the Normal To command, see SolidWorks Help: Orientation

Orienting a Model to XYZ Coordinates

You can use the Normal To command to orient a model normal to the nearest global XYZ coordinates...To orient a model normal to the nearest global XYZ coordinates...For more information on the Normal To command, see Orientation

Reference Plane Normal to Edge

You can sketch on a reference plane, created automatically, normal to an edge...To sketch on a reference plane normal to an edge...A reference plane normal to the selected edge is created at the end point of the edge closest to the selected area

Section Display Types

Section Display Types Alternate Section Display Normal Section Display

Using Normal to Origin Feature

With Normal to origin feature cleared, the evaluation dimension Y is taken along the Y axis...With Normal to origin feature cleared, the maximum offset between the two pipes is 7...With Normal to origin feature selected, the maximum offset between the two pipes is 9

Stress Components

SX: Normal stress in the X-direction of the selected reference geometry...SY: Normal stress in the Y-direction of the selected reference geometry...SZ: Normal stress in the Z-direction of the selected reference geometry

Stress

direction acting normal to the XY-plane TXY Stress in the Y-direction acting on the plane normal to the X-direction (YZ-plane) TYX Stress in the X...direction acting on the plane normal to the Y-direction (XZ-plane) TXZ Stress in the Z-direction acting on the plane normal to the X-direction (YZ...plane) TZX Stress in the X-direction acting on the plane normal to the Z-direction (XY-plane) TYZ Stress in the Z-direction acting on the plane normal to the Y-direction (XZ-plane) TZY Stress in the Y-...

Examples of Loft Tangency

None End Constraint Normal to Profile...Normal to Profile...Normal to Profile End Constraint Normal to

Strain Components

EPSX: Normal strain in the X-direction of the selected reference geometry...EPSY: Normal strain in the Y-direction of the selected reference geometry...EPSZ: Normal strain in the Z-direction of the selected reference geometry

Roller/Sliding

Use the Roller/Sliding restraint to specify that a planar face can move freely into its plane but CANNOT move in the direction normal to its plane

Mate Alignment

Vectors normal to the selected faces point in the same direction...Vectors normal to the selected faces point in opposite directions

Animation Controller Pop-up Toolbar

... the animation. Normal...Display at normal speed...Display at half the normal speed. Fast Play . Display ...

Example of Extrusion Direction for Ribs

on a parallel plane. Extrusion Direction: Parallel to Sketch Extrusion Direction: Normal to Sketch

Resolved

Resolved (or unsuppressed) is the normal state for assembly components. A resolved component is ...

Loft Features

... loft entities: End conditions Normal to profile and Direction vector Guide curves Profile

Example of Length and Angle Custom Properties

Angle1 and Angle2 are the angles between the normal of the cut face and the centerline of the body.

Comparison of Components Suppression States

... be edited in-context Load and rebuild speed Normal...Normal...Normal Normal Faster Faster 1 In-context ...

Orientation/Twist Type - Follow Path

Profiles always maintain a normal to the path...The normal of the plane, the Z-axis, is the...The normal of the plane, the Z-axis, is the

Orientation

Click Normal To (View Orientation flyout &#8211 Heads-up View toolbar...If you click Normal To again, the model flips 180 &#176 See Orienting a Model to XYZ Coordinates for another way to display a model in Normal To view...Click Normal To (View Orientation flyout &#8211 Heads-up View toolbar...

Wrap Feature

The sketch plane must be tangent to the face, allowing the face normal and the sketch normal to be parallel at the closest point...For a plane, the pull direction is normal to the plane...To wrap the sketch normal to the sketch plane, leave Pull Direction blank

Applying Pressure

The program applies pressure loads normal to each face...Select: Normal to selected face to apply the pressure in the direction normal to each selected face

Orientation

. Normal To is normal (perpendicular) to the sketch plane or the selected plane. To access the ...