Hole Series (Last Part) PropertyManager
The Last Part is the last part
through which the Hole
Series passes. The Last Part
contains the tap, or the bottom of the hole if it is a blind hole.
End Hole Specification
|
|
Clearance Hole |
Tap |
Auto size based
on start hole. Sets the diameter for the last part by choosing
the closest available hole size to the diameter of the first part. The
available hole sizes depend on the selected screw type. If you change
the Size (First
Part PropertyManager, Start Hole
Specification), the last part automatically updates to match. Clear
this option to use Custom Sizing.
Type.
Select a drill type or screw clearance.
Size.
Select a size for the fastener.
Fit. Select
a fit for the fastener: Close,
Normal, or Loose.
End Component
End Condition
The End Condition options vary
depending on the hole type. Use the PropertyManager images and descriptive
text to set the options.
Select an end condition from the list: Blind, Through
All, Up to Surface, Offset from Surface. Set other end condition
options depending on the condition and hole type.
|
Blind is the distance measured
from the first face intersected by the hole axis in the last component.
|
|
|
|
Tap drill diameter |
Cosmetic thread |
Remove thread |
|
|
|
Cuts the hole at the tap drill diameter. |
Cuts the hole at the tap drill diameter with a cosmetic
thread.
With thread callout. Adds an
annotation for drawings only. |
Cuts the hole at the thread diameter. |
Options
Custom Sizing
Sizing options vary depending on the hole type. Use the PropertyManager
images and descriptive text to set the options such as diameter, depth,
and angle.
You can override the value in the boxes.
To revert to the default values, click Restore
Default Values. The background color of the boxes is white for
the default value, and yellow for the override value.