If a Section
View in a Drawing needs to be updated (when a section line
position or direction changes, for example), the view is marked with a
crosshatch pattern. See Updating
Views.
To change the length or location of the section
line, the length of the leader, or the position of the label, select the
line or label and drag it.
-
To edit the letter label on the section line, either:
Double-click the letter label, edit in place, and click outside
the label to exit.
- or -
Select the section line and edit the label and its font in the Section
View PropertyManager.
-
To edit the note text on the section view, double-click the text,
edit in place, and click outside the label to exit.
NOTE: To edit the properties
of the section view note text, select the note and edit the properties
in the Note
PropertyManager.
To edit the sketch used to create the section
line, right-click an entity of the sketch and select
Edit Sketch. Edit the sketch as needed. Then select one sketch
entity and click Rebuild 
to update the section view.
To change the cut direction as indicated by the
arrows, double-click anywhere along the section line, or select the section
line and select Flip direction
in the Section View PropertyManager.
To modify the crosshatch pattern, click a face,
or hold Ctrl and select multiple
faces, and make changes in the Area
Hatch/Fill PropertyManager.
To modify the length of a centerline, drag the
endpoints. Centerlines are automatically added where needed in section
views, if they were selected in Auto
insert on view creation. To remove centerlines, you can delete them
from the section view.