You can specify document-level drafting settings for hole tables.
To open this page, with a drawing open, click
Options
(Standard toolbar), select the Document Properties tab, and then select .
Overall drafting standard
Overall drafting standard
|
Inherited from the selected Drafting Standard page settings. |
Text
Font
|
Click to modify the font.
|
Location precision
Unit Precision |
Select the number of digits after the decimal point for the hole location value. |
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_precision.gif) |
Alpha/numerical control
Select letters or numbers for hole table tag sequencing.
A, B, C |
Precedes the hole tag sequence number with a letter. |
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_numbering_alpha.gif) |
1, 2, 3 |
Defines the hole tag sequence as a number. |
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_numbering_numbers.gif) |
Layer
Layer
|
Select a layer. You must first create layers for the drawing before you can select them for document properties.
|
You must select
Per Standard for
Layer (Layer toolbar) in the drawing view document to apply these layer settings.
Origin indicator
Origin indicator |
Select a standard to govern origin display or select Per Standard to use the overall drafting standard.
|
ANSI, BSI:
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_ORGIN_ansi_basi.gif) |
ISO, GB:
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_ORGIN_isogb.gif) |
DIN, JIS, GOST:
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_ORGIN_din_jis_gost.gif) |
Tag angle/offset from profile center
Dual dimensions
Dual dimensions display
|
Select to display dimensions in dual units. |
Show units for dual display |
Select to display units for the second set of dimensions. |
Dimension value position |
Top |
Bottom |
Right |
Left |
Options
Leading zeros
|
Standard |
Leading zeros appear according to the overall drafting standard. |
Show |
Zeros before decimal points are shown. |
Remove |
Leading zeros do not appear.
|
|
Trailing Zeros |
Smart |
Trailing zeros are trimmed for whole metric values, conforming to ANSI and ISO standards. |
Standard |
Trailing zeros appear according to the ASME Y14.5M-1994 standard. |
Show |
Trailing zeros are displayed according to the decimal places you specify for Units. |
Remove |
Trailing zeros do not appear.
|
|
Combine same tags |
Select to combine items with the same tags in one row. |
![](../../../../AllArt/art_local/detailing_appendix/hole_table_scheme02.gif) |
Combine same size |
Select to merge holes of the same size across several rows. |
![](../../../../AllArt/art_local/detailing_appendix/hole_table_scheme01.gif) |
Show hole centers |
Select to show hole centers. |
![](../../../../AllArt/art/SolidWorks/Core/Detailing/appendixart/hole_table_SHOWHOLEcenters.gif) |
Automatic update of hole table |
Select to update the hole table when you add or delete components in the associated assembly. |
|
Reuse deleted tags |
Select to use deleted tags. |
|
Add new row at the end of the table |
Select to add new row at the bottom of the table. |
![](../../../../AllArt/art_local/hole-table-row-added-bottom.gif) |