You can specify document-level drafting settings for surface finish annotations.
To open this page, with a drawing open, click
Options 
(Standard toolbar), select the Document Properties tab, and then select .
Overall drafting standard
| Overall drafting standard
|
Inherited from the selected Drafting Standard page settings. |
Base surface finish standard
| Base surface finish standard
|
Select a standard: - ANSI
- ISO
- DIN
- JIS
- BSI
- GOST
- GB
|
Leader style
 Leader Style
|
Select: a style. |
 Leader Thickness
|
Select: a thickness or select Custom Size and enter a thickness. |
Text
| Font
|
Click to modify the font.
|
Leader display
| Leader display
|
Select from:- Straight
- Bent. Inserts a horizontal bend in the leader that is aligned with the text. Select either:
- Use document leader length. Derives leader length from the Annotations page settings.
- Leader length. Lets you enter the length of the unbent portion of the leader.
|
Layer
| Layer
|
Select a layer. You must first create layers for the drawing before you can select them for document properties.
|
You must select
Per Standard for
Layer (Layer toolbar) in the drawing view document to apply these layer settings.
Options
| Display symbols per 2002
|
Select to display surface finish per 2002 standards. Not available for ANSI or JIS. |
 |
| JIS surface finish size |
Select Custom Scale and enter a Scale ratio, or select 1, 2, or 3 characters to specify the size. |
|