DimXpert
DimXpert speeds the process of adding reference dimensions by applying
dimensions in drawings so that manufacturing features, such as patterns,
slots, and pockets, are fully-defined. The DimXpert tool is accessible
in the Dimension PropertyManager.
You select a feature’s edge to dimension, then DimXpert applies all associated
dimensions in that drawing view for the feature. See also Xperts
Overview.
DimXpert differs from Autodimension
because DimXpert:
Recognizes patterns (linear and polar dimensions
with instance counts) and countersink holes.
Produces predictable results. For example, when
you select an edge in DimXpert, only the feature represented by the edge
is dimensioned. With autodimensioning, you may get unwanted dimensions
to several features.
When using DimXpert to dimension hole patterns,
you may get a message that the hole callout will not parametrically update
if underlying features change. If the hole pattern was not created as
a pattern of Hole Wizard holes, any changes you make to the model do not
update the hole callout.
To apply dimensions using DimXpert:
In a drawing, click Smart
Dimension or Tools,
Dimensions, Smart.
In the PropertyManager, under Dimension
Assist Tools, click DimXpert .
Set options in the Dimension
PropertyManager.
In the PropertyManager, if you selected:
By vertex/hole
center, select a vertex in the drawing view.
By Selection,
select an edge for the X and Y values.
You can also drag the datum
origin to a vertex, hole center, or virtual sharp created
by the edges you chose in By Selection.
|
Vertex and manufacturing feature (hole pattern hole) |
In the graphics area, select a manufacturing feature
to dimension.
Repeat step 5 for other manufacturing features
as necessary.
Click .
|
Both hole patterns and the center hole are dimensioned |
Related Topics
Smart Dimensioning
Inserting Model
Items