Hole Series (Middle Parts) PropertyManager
The Middle Parts are all the
parts through which the Hole
Series passes (between the first and last parts). If you add
new components between the start and end components after you create the
hole series, you can choose to include the new components in the hole
series. You must edit the hole series to update it.
Middle Hole Specification
Auto size based
on start hole. Sets the diameter for the middle parts by choosing
the closest available hole size to the diameter of the first part. The
available hole sizes depend on the selected screw type. If you change
the Size (First
Part PropertyManager, Start Hole
Specification), the middle parts automatically update to match.
Clear this option to set Custom Sizing.
Type.
Select a drill type or screw clearance.
Size.
Select a size for the fastener.
Fit. Select
a fit for the fastener: Close,
Normal, or Loose.
Custom Sizing
Sizing options vary depending on the hole type. Use the PropertyManager
images and descriptive text to set the options such as diameter, depth,
and angle.
You can override the value in the boxes.
To revert to the default values, click Restore
Default Values. The background color of the boxes is white for
the default value, and yellow for the override value.
New Component(s)
(Available when you add new middle components to the hole series) From
the list, select the middle components to include.
To add middle components to the hole series:
In this example, you created a hole series
with the middle component suppressed. Now you want to include the middle
component in the hole series.
In the FeatureManager design tree, right-click
the middle component and select Set to
Resolved.
The middle component appears but is not included
in the hole series.
In the FeatureManager design tree, right-click
the hole series feature 
and select Edit
Feature.
Select the Hole
Series (Middle Parts) 
tab to open the PropertyManager.
Expand 
New
Component(s)
to add the middle component to the hole series.
Click 
.
