隱藏目錄

Enabling Broadcast on Windows Vista

Enterprise PDM uses a broadcast method to list available archive servers on the network. The broadcast is sent from a dynamic port on the client to the default port 3030 on the server system. By default, Windows firewall allows only three seconds to return the broadcast result from the server to the dynamic client port. After that, the broadcast reply is stopped by the firewall.

If you run Enterprise PDM on a Vista workstation on which Windows firewall is active and broadcast is not enabled, archive servers are not listed when you use View Setup to create a vault view or when you attach to an archive server from the Administration tool.

To broadcast successfully on a Vista client when Windows firewall is active, add the applications that request the broadcast to the firewall exception list:
  • View Setup Wizard (ViewSetup.exe)
  • Administration tool (ConisioAdmin.exe)

This Microsoft Knowledge Base article describes the issue in detail: http://support.microsoft.com/?kbid=885345.

To enable broadcast on Windows Vista:

  1. From Windows Start, click Settings > Control Panel > Security Center .
  2. In the Windows Security Center, under Manage security settings for, select Windows Firewall.
  3. In the Windows Firewall dialog box, on the Exceptions tab, click Add Program.
  4. Click Browse, then locate ViewSetup.exe (by default in \Program Files\SolidWorks Enterprise PDM). Click Open.
  5. Repeat step 4 to add ConisioAdmin.exe, listed under Programs as Administration.
  6. Click OK twice, then close the Windows Security Center.


提供對此主題的意見反應

SOLIDWORKS 歡迎您提供有關於文件呈現方式、正確性、及完整性的意見反應。請使用下方的表格直接將您對此主題的意見與建議傳送給我們的文件團隊。文件團隊並無法回答關於技術支援的問題。按一下此處來獲得關於技術支援的資訊

* 必要的

 
*電子郵件:  
主旨:   說明主題的意見反應
頁面:   Enabling Broadcast on Windows Vista
*意見:  
*   我承認已閱讀且僅此接受隱私權政策,Dassault Systèmes 將遵循此政策之規定使用我的個人資料

列印主題

選擇要列印的內容範圍:

x

偵測到您使用的瀏覽器版本是舊於 Internet Explorer 7。要獲得最佳的顯示,建議您升級瀏覽器到 Internet Explorer 7 或更新的版本。

 不要再次顯示此訊息
x

Web 式說明內容版本:SOLIDWORKS PDM 2012 SP05

要從 SOLIDWORKS 中停用 Web 式的說明並改用本機說明,請按一下說明 > 使用 SOLIDWORKS Web 式說明

要報告在 Web 式說明介面及搜尋中遇到的問題,請聯絡您當地的技術支援代表。要針對個別說明主題提供意見反應,請使用個別主題頁面中的「提供對此主題的意見反應」連結。