Hide Table of Contents

Displaying Thin Regions of a Part

To display thin regions of a part:

  1. In an open part, click Thickness Analysis Tool_Thickness_Analysis_Utilities.gif (Tools toolbar) or Tools > Thickness Analysis.
    thickness_analysis_thin.gif
  2. In the PropertyManager, under Analysis Parameters:
    1. Set a value for Target thickness PM_thickness.gif.
    2. Select Show thin regions.
  3. Under Color Settings, set the color range:
    • Select Full color range to show the part in various colors shown in the Thickness scale.
    • Clear Full color range then click Edit Color to show the part in different shades of the Target thickness color and Minimum thickness color.
  4. Under Color Settings, select one of the following Thickness scale display options:
    Option Description
    Continuous Uses a gradient range.
    Discrete Uses a discrete number of color bands. Set a value.
  5. (Optional) Under Performance/Accuracy:
    1. If the part is a multibody part, select a body in the graphics area. Thickness Analysis can be performed on only one body at a time. The body name appears under Body for analysis PM_bodies.gif.
    2. Select faces in the graphics area to perform Thickness Analysis on the selected entities only. The face names appear under Faces for local analysis PM_faces_to_select.gif.
    3. Move the Resolution slider to adjust the color precision used for the results. Higher resolution settings take a longer time to calculate the results.
  6. Click Calculate.

    The part is displayed in various shades to indicate the different thicknesses.

    Drag the pointer over the part to see the tooltip display thickness values.
    thickness_analysis_thin_done.gif



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Displaying Thin Regions of a Part
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46