Use the Mill screen in the Costing Template Editor to filter the machines associated with milling operations.
To display this screen:
- In the Costing Template Editor, click Mill.
The Mill screen is only available after you enter information in the Stock Material screen.
You can copy and paste numerical data in the Costing Template Editor.
Filters
Displays the rows that match the Class, Custom Material, Machine, Tool Type, and Surface Finish selected.
| Class |
Sets the material classes and custom material classes from the SolidWorks material database. You can have many instances of the same Class with a different Custom Material to denote finish and other characteristics that affect costs, but you cannot define physical properties (such as density). |
| Custom Material |
Sets a material name associated with the selected Class. |
| Machine |
Sets the name of the turning machine. |
| Tool Type |
Sets the tooling operation to use. Select one of the following:
|
OD Turning
|
Removes material from a part's outer diameter.
|
|
ID Turning
|
Removes material from a part's inner diameter.
|
|
Facing
|
Removes material from a part's end face.
|
|
OD Grooving
|
Adds grooving to a part's outer diameter.
|
|
ID Grooving
|
Adds grooving to a part's inner diameter.
|
|
Face Grooving
|
Adds grooving to a part's end face.
|
|
Chamfer/Fillet
|
Adds chamfers or fillets to a part's edges.
|
|
| Surface Finish |
Sets the finish generated by the tool while removing material. Select one of the following:
|
Roughing
|
Creates a standard finish generated by the tool. Use roughing to remove the maximum material.
|
|
Semi-Finishing
|
Creates a smoother finish than roughing.
|
|
Finishing
|
Creates the smoothest finish.
|
|
| D Diameter |
Sets the diameter of the milling tool. |
| Fr Feed rate |
Sets the length of feed per revolution. |
| S Surface speed |
Sets the speed of the spinning surface. |
| Comments |
|