Hide Table of Contents
ICWDropTestSetup Interface Members

The following tables list the members exposed by ICWDropTestSetup.

Public Properties

 NameDescription
 PropertyDropHeightGets or sets the height from which the model is dropped to the floor.  
 PropertyDropHeightTypeGets or sets the drop height type.  
 PropertyDropHeightUnitGets or sets the units of drop height.  
 PropertyDropTypeGets or sets the type of input to specify for this drop test setup.  
 PropertyFlipGravityDirectionGets or sets whether to reverse the direction of gravity.  
 PropertyFlipVelocityDirectionGets or sets whether to reverse the direction of the velocity at impact.  
 PropertyFrictionCoefficientGets or sets the coefficient of friction between the model and the impact plane.  
 PropertyGravityGets or sets the magnitude of gravity.  
 PropertyGravityUnitGets or sets the units of gravity.  
 PropertyMassDensityGets or sets the mass density of the impact layer.  
 PropertyNormalStiffnessGets or sets the stiffness per unit area that is normal to the impact plane.  
 PropertyStiffnessUnitGets or sets the units of stiffness.  
 PropertyTangentialStiffnessGets or sets the stiffness per unit area that is parallel to the impact plane.  
 PropertyTargetOrientationTypeGets or sets the orientation of the impact plane.  
 PropertyTargetStiffnessTypeGets or sets the stiffness type of the impact plane.  
 PropertyTargetThicknessGets or sets the thickness of the impact layer.  
 PropertyThicknessUnitGets or sets the units of thickness.  
 PropertyVelocityGets or sets the magnitude of velocity at impact.  
 PropertyVelocityUnitGets or sets the units of velocity.  
Top

Public Methods

 NameDescription
 MethodDropTestSetupBeginEditStarts editing the drop test setup.  
 MethodDropTestSetupEndEditEnds editing the drop test setup.  
 MethodSetEntityForGravityDirectionSets the face, edge, or plane reference to determine the direction of gravity.  
 MethodSetEntityForTargetOrientationSets the orientation reference for the impact plane.  
 MethodSetEntityForVelocityDirectionSets the face, edge, or plane reference to determine the direction of the velocity at impact.  
Top

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   ICWDropTestSetup Interface Members
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.