Hide Table of Contents
ICWResults Interface Members

The following tables list the members exposed by ICWResults.

Public Methods

 NameDescription
 MethodActivatePlot

Activates the specified plot.

 
 MethodAddIsoClippingToPlotAdds iso clipping to the specified result plot.  
 MethodDeletePlotDeletes the specified plot.  
 MethodGetAccelerationComponentForAllStepsAtNodeGets the acceleration for all solution steps at the specified node for the specified acceleration component.  
 MethodGetAccelerationForEntitiesGets the acceleration for the specified entities, solution step, and acceleration component.  
 MethodGetBeamForcesForEntitiesGets the force values for the specified force for the selected beams.  
 MethodGetBeamMinMaxStressGets the minimum and maximum elemental stresses for beams at the specified solution step.  
 MethodGetBeamStressForEntitiesGets the stress values for the specified type of stress for the selected beams.  
 MethodGetBucklingLoadFactorsGets the buckling load factors.  
 MethodGetConnectorForcesObsolete. Superseded by ICWResults::GetConnectorForces2.  
 MethodGetConnectorForces2Gets the x-, y-, and z-component and resultant forces, bending moments, and torques for the specified pin, bolt, bearing, spring, spot weld, or link connector.  
 MethodGetContactForcesAndFrictionGets the specified contact or friction forces for the specified entities.  
 MethodGetDisplacementAtPointsGets the specified displacement component at the specified points for the specified solution step.  
 MethodGetDisplacementComponentForAllStepsAtNode

Gets the specified displacement component at the specified node for all solutions steps.

 
 MethodGetDisplacementForEntities

Gets the specified displacement component for the specified entities at the specified solution step.

 
 MethodGetEdgeWeldResultsGets the edge weld results for the specified edge weld connector.  
 MethodGetEnvelopeAccelerationForEntitiesGets the specified envelope acceleration for the specified entities across all solution steps.  
 MethodGetEnvelopeDisplacementForEntitiesGets the specified envelope displacement for the specified entities across all solution steps.  
 MethodGetEnvelopeStrainForEntitiesGets the specified envelope strain for the specified entities across all solution steps.  
 MethodGetEnvelopeStressForEntitiesGets the specified envelope stress for the specified entities across all solution steps.  
 MethodGetEnvelopeVelocityForEntitiesGets the specified envelope velocity for the specified entities across all solution steps.  
 MethodGetFactorOfSafetyForCompositesGets the range of stress or buckling factors of safety for the specified shell type, surface bodies, failure criteria, and other options.  
 MethodGetFatigueForEntities

Gets the specified fatigue component for the specified entities.

 
 MethodGetFreeBodyForcesAndMomentsGets the x-, y-, and z-component and resultant free body forces and moments for the specified entities and the entire model.  
 MethodGetHeatPowerOrEnergyGets the heat power or heat energy for the specified entities.  
 MethodGetLinearizedStressValuesGets the linearized membrane and bending stresses between the specified locations of a sectional plot of a pressure vessel study.  
 MethodGetMassParticipation

Gets the mass participation factors in the X, Y, and Z directions for all modes.

 
 MethodGetMaximumAvailableSteps

Gets the maximum solution step number for which results exist.

 
 MethodGetMinMaxAccelerationGets the algebraic minimum and maximum for the specified acceleration component and solution step.  
 MethodGetMinMaxDisplacementGets the algebraic minimum and maximum for the specified displacement component and solution step.  
 MethodGetMinMaxFactorOfSafetyGets the algebraic minimum and maximum factors of safety (FOS) for the specified entities.  
 MethodGetMinMaxFatigueGets the algebraic minimum and maximum for the specified fatigue component.  
 MethodGetMinMaxStrain

Gets the algebraic minimum and maximum for the specified strain component, element, and solution step.

 
 MethodGetMinMaxStress

Gets the algebraic minimum and maximum for the specified stress component, element, and solution step.

 
 MethodGetMinMaxThermal

Gets the algebraic minimum and maximum for the specified thermal component and solution step.

 
 MethodGetMinMaxVelocityGets the algebraic minimum and maximum for the specified velocity component and solution step.  
 MethodGetPlotCountGets the number of plots in this study.  
 MethodGetPlotNamesGets the names of the plots in this study.  
 MethodGetReactionForcesAndMoments

Gets the reaction forces and moments for the entire model at the specified solution step.

 
 MethodGetRemoteForcesGets the x-, y-, and z-component and resultant forces applied to selected entities as a result of transferring a remote load in static studies.  
 MethodGetResonantFrequencies

Gets the resonant frequency values.

 
 MethodGetRotationalDisplacement

Gets the rotational displacements at the specified solution step.

 
 MethodGetStrain

Gets the strain results for an element at the specified solution step.

 
 MethodGetStrainComponentForAllStepsAtNode

Gets the specified strain component at the specified node for all solution steps.

 
 MethodGetStrainForEntities

Obsolete. Superseded by ICWResults::GetStrainForEntities2.

 
 MethodGetStrainForEntities2

Obsolete. Superseded by ICWResults::GetStrainForEntities3.

 
 MethodGetStrainForEntities3

Gets the specified strain component for the specified entities at the specified solution step.

 
 MethodGetStressGets the stress results for all nodes or elements at the specified solution step.  
 MethodGetStressComponentForAllStepsAtNode

Gets the specified stress component at the specified node for all solution steps.

 
 MethodGetStressForEntities

Obsolete. Superseded by ICWResults::GetStressForEntities2.

 
 MethodGetStressForEntities2

Obsolete. Superseded by ICWResults::GetStressForEntities3.

 
 MethodGetStressForEntities3

Gets the specified stress component for the specified entities at the specified solution step.

 
 MethodGetThermalComponentForAllStepsAtNode

Gets the thermal results for the specified component at the specified node for all solutions steps.

 
 MethodGetThermalForEntities

Gets the thermal values for selected geometric entities.

 
 MethodGetThermalValues

Gets the thermal results at the specified solution step.

 
 MethodGetTranslationalDisplacement

Gets the translational displacements at the specified solution step.

 
 MethodGetVelocityComponentForAllStepsAtNodeGets the specified velocity component for all solution steps at the specified node.  
 MethodGetVelocityForEntitiesGets the specified velocity component for the specified entities and at the specified solution step.  
 MethodIGetPlotNamesGets the names of the plots in this study.  
 MethodSavePlotsAseDrawingsSaves the specified results plot as an eDrawings file with the specified name in the specified location.  
Top

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   ICWResults Interface Members
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.