Hide Table of Contents

Model Items

You can insert dimensions, annotations, and reference geometry from a model document (part or assembly) into a drawing.

You can insert items into a selected feature, an assembly component, an assembly feature, a drawing view, or all views. When inserting items into all drawing views, dimensions and annotations appear in the most appropriate view. Features that appear in partial views, such as detail or section views, are dimensioned in those views first.

To insert model items into a lightweight drawing, the drawing view must be set to resolved.

Additionally, you can use the hide/show pointer pointer_mouse_pan_hide_show.png while the PropertyManager is active. The left mouse button moves items, and the right mouse button hides/shows items. When the Model Items PropertyManager is displayed, hidden model items are gray.

You can manipulate model items in the following ways:
Delete Use the Delete key to delete model items.
Drag Use the Shift key to drag model items to another drawing view.
Copy Use the Ctrl key to copy model items to another drawing view.

Inserting Model Items

To insert existing model items into a drawing:

  1. Click Model Items Tool_Model_Items_Annotation.gif (Annotation toolbar), or click Insert > Model Items.

    You can also preselect views, features, or components to which you want to add model items. You can select features or components from the FeatureManager design tree or the graphics area.

  2. Set options in the Model Items PropertyManager.

    Dimensions are inserted for unabsorbed model sketches only if the sketch is visible in the drawing. To insert dimensions for an unabsorbed sketch, right-click the sketch in the FeatureManager design tree and select Show before inserting the dimensions. Dimensions belonging to an unabsorbed sketch are shown or hidden depending on the state of Show or Hide.

  3. Click PM_OK.gif.
When you insert dimensions, the software may provide feedback to guide you. For example, if all the dimensions are already inserted in a view, the software suggests a different view, if possible. If additional dimensions cannot be inserted, the software informs you.

You can toggle the visibility of individual reference geometry items. Right-click the item, and select Hide or Show.

Imported annotations display in the Annotations (Imported) color; reference annotations (added in the drawing) are displayed in the Annotations (Non Imported) color. These colors are specified in Tools > Options > System Options > Colors.

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

Subject:   Feedback on Help Topics
Page:   Model Items
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:


We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.