Expand IntroductionIntroduction
Expand AdministrationAdministration
Expand User InterfaceUser Interface
Expand SOLIDWORKS FundamentalsSOLIDWORKS Fundamentals
Expand Moving from 2D to 3DMoving from 2D to 3D
Expand AssembliesAssemblies
Expand CircuitWorksCircuitWorks
Expand ConfigurationsConfigurations
Expand SOLIDWORKS CostingSOLIDWORKS Costing
Expand Design CheckerDesign Checker
Expand Design Studies in SOLIDWORKSDesign Studies in SOLIDWORKS
Expand Detailing and DrawingsDetailing and Drawings
Expand DFMXpressDFMXpress
Expand DriveWorksXpressDriveWorksXpress
Expand FloXpressFloXpress
Expand SLDXML Data ExchangeSLDXML Data Exchange
Expand Import and ExportImport and Export
Expand Model DisplayModel Display
Expand Mold DesignMold Design
Expand Motion StudiesMotion Studies
Expand Parts and FeaturesParts and Features
Expand RoutingRouting
Expand Sheet MetalSheet Metal
Collapse SimulationSimulation
Expand SimulationXpressSimulationXpress
Expand SketchingSketching
Expand Sustainability ProductsSustainability Products
Expand SOLIDWORKS MBDSOLIDWORKS MBD
Expand SOLIDWORKS UtilitiesSOLIDWORKS Utilities
Expand TolerancingTolerancing
Expand TolAnalystTolAnalyst
Expand ToolboxToolbox
Expand WeldmentsWeldments
Expand Workgroup PDMWorkgroup PDM
Expand TroubleshootingTroubleshooting
Glossary
Hide Table of Contents

Edge Weld Connector PropertyManager

The edge weld connector estimates the appropriate size of a weld needed to attach two metal components.

The program calculates the appropriate weld size at each mesh node location along the weld seam. Select American or European Welding Standards to perform the weld calculations.

The Edge Weld Connector is available in SOLIDWORKS Simulation Professional and SOLIDWORKS Simulation Premium.

The Edge Weld connector is not available for composite shells.

To display this PropertyManager:

Create a static Simulation study. Right-click Connections and select Edge Weld.

Weld Type

Type  
Selects the weld type.
  • Fillet, Double-Sided ds_fillet_weld.png
  • Fillet, Single-Sided
  • Groove, Double-Sided
  • Groove, Single-Sided
Face Set 1 select_face_planar.png Selects the face of a shell or sheet metal body. The selected face belongs to the terminated part.
Face Set 2 select_face_planar.png Selects the face of a shell, sheet metal, or solid body.
For fillet welds, the selected faces of Sets 1 and 2 are perpendicular to each other. For groove welds, the selected faces are parallel.
Intersecting Edges Automatically selects the touching edges between the selected faces of Sets 1 and 2 to apply the welding. You can also select non-touching edges. The selected edges belong to the terminated part.
Weld Orientation   Available for single sided welds only. Provides the location of the weld with respect to the shell surface alignment. A red arrow in the graphics area shows the weld orientation.
Weld is on Side 1 Positions the weld at the top surface of the shell.
Weld is on Side 2 Positions the weld at the bottom surface of the shell.
Include the induced bending moment due to asymmetry of the joint loading

Click here for an explanation of the eccentric bending moment.
The shell surface alignment controls the direction of the local weld joint coordinate system and the interpretation of the edge weld results. See Edge Wedge Definitions.

Weld Sizing

Select American Standard (American Welding Standard D1.1 and D1.2) or European Standard (Eurocode 3: Design of steel structures, Part 1.8: Design of joints, Section 4.5) to perform the weld size calculations.

American Standard  
Electrode Sets the electrode's material. To define a material that is not listed, select Custom Steel or Custom Aluminum.
Weld Strength Displays the selected electrode's material ultimate shear strength. For a Custom Steel or Custom Aluminum, enter the appropriate ultimate shear strength for the weld throat.
Safety Factor Reduces the weld's ultimate shear strength by the given safety factor.
The allowable shear strength for the electrode's material is calculated as: Ultimate shear strength / safety factor. Engineering projects governed by specific codes must adhere to the minimums and standards stipulated therein.

American National Standard for Automotive Lifts

Reduces the weld's ultimate shear strength by a default factor of 3 (ANSI/ALI B153.1-90).

Under the Hook Lifting Devices

Reduces the weld's ultimate shear strength by a default factor of 5 (ANSI/ASME B30.20).
Estimated weld size Lets the program calculate the appropriate size for the weld connector. The program compares the value of the weld size in this box with the appropriate weld size and displays the results in the Weld Check Plot. For single sided welds, the program considers their position on the side of the shell with the weakest behavior.
European Standard  
Material of weaker joined part Select the weaker part which is connected by the edge weld. The weaker part has the lesser material tensile strength. To type a custom material tensile strength, select Custom.
Ultimate Tensile Strength Displays the selected material's tensile strength.
You need to define the material's tensile strength in the Material dialog box for the bodies joined by the edge weld.
Correlation Factor (βW) Enter a correlation factor between 0.8 and 1.0 for the weld calculations. See the reference table for a list of recommended values.
Partial Safety Factor (γΜ) Enter a safety factor for joints between 1.0 and 1.25. See the reference table for a list of recommended values.
Estimated weld size Lets the program calculate the appropriate size for the weld connector. The program compares the value of the weld size in this box with the calculated weld size and displays the results in the Weld Check Plot. For single sided welds, the program considers their position on the side of the shell with the weakest behavior.

Symbol Settings

Edit Color   Selects a color for the edge weld symbols from the color palette.
Symbol size Changes the size of the edge weld symbols.
Show preview   Toggles the display of the edge weld symbols.

Contents



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Edge Weld Connector PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.21