Use the Convert To Sheet Metal PropertyManager to convert a solid or surface body to a sheet metal part. The solid body can be an imported sheet metal part.
To open this PropertyManager:
Click Convert to Sheet Metal 
(Sheet Metal toolbar) or .
Sheet Metal Gauges
| |
Use gauge table |
Lets you select a gauge table as the base of the sheet metal feature. The sheet metal parameters (material thickness, bend radius, and bend calculation method) use the values stored in the gauge table unless you override them.The Use gauge table option is only available the first time you use the Convert to Sheet Metal tool.
|
 |
Select Table |
Lets you select or browse to a gauge table. This list is populated if you set the folder to search for gauge tables in . In Show folders for, select Sheet Metal Gauge Table. |
Sheet Metal Parameters
 |
Select a fixed entity |
Select the face that remains in place when the part is flattened. You can select only one face. |
 |
Sheet thickness |
|
| |
Reverse Thickness |
Changes the direction in which the sheet thickness is applied. |
| |
Keep body |
Keeps the original solid body, which would otherwise be consumed by the sheet metal feature. |
 |
Default radius for bends |
|
Bend Edges
 |
Select edges/faces that represent bends |
In the graphics area, click an edge to add it to the list of bend edges. |
| |
Collect All Bends |
When there are pre-existing bends, such as in an imported part, finds all of the appropriate bends in the part. |
| |
Show callouts |
Displays callouts in the graphics area for bend edges. |
Rip Edges found (Read-only)
When you select bend edges, the corresponding rip edges are selected automatically.
Show callouts displays callouts in the graphics area for rip edges.
Rip Sketches
 |
Select a sketch to add a rip |
Select a 2D or 3D sketch to define a required rip. |
 |
Default gap for all rips |
|
| |
Show callouts |
Displays callouts in the graphics area for rip sketches. |
Custom Bend Allowance
Select to set a Bend Allowance Type and a value for the bend allowance.
The bend allowance method is only available the first time you use the Convert to Sheet Metal tool.
Auto Relief
The software automatically adds relief cuts where needed when
inserting bends.
| Relief Type |
Select the type of relief cut to be added:
|
| Relief Ratio |
If you select Rectangular or Obround, you must set a relief ratio. In the following equation, the distance d represents the width of the auto relief cut and the depth by which it extends past the bend region:
Relief ratio = d / part thickness
The value of the relief ratio must be between 0.05 and 2. The higher the value, the larger the size of the relief cut added during the insertion of bends.
|