Hide Table of Contents

Updating Cut Lists

You can update cut lists manually or automatically.

The first time you create a part document, the SOLIDWORKS software turns on the following Weldment document properties in the part template that is created:

  • Automatically create cut lists
  • Automatically update cut lists

If you continue to use this part template, these options are enabled for all new part documents.

If you create parts using pre-2015 templates, these options are turned off.

To disable either of these options:

  1. Click Tools > Options > Document Properties > Weldments to open the Weldments Document Properties page.
  2. Clear the option.
  3. Save the template.
  4. Use the saved template to create new parts.

In the FeatureManager design tree, the cut list icon shows the cut list status:

  • indicates the cut list is up to date.
  • fm_cutlist_needs_update.png indicates the cut list should be updated.

Within a specific model, you can turn automatic update on or off.

To enable automatic update:

  • Right-click the cut list and click Update Automatically.

    The software updates the cut list automatically when you add new features, such as extruded plates or 3D bounding boxes, edit existing features, or rebuild the model.

    The model's custom properties and internal supporting data are also updated, preventing custom property errors.

To manually update the cut list if automatic update is not enabled:

  • In the FeatureManager design tree of a weldment part document, right-click Cut list fm_cutlist_needs_update.png and select Update.

    The Cut List icon changes to .

    Identical items are grouped together in Cut-List-Item subfolders. Weld beads are excluded from the cut list. You can select other features to also be excluded.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Updating Cut Lists
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.