Knit Surface PropertyManager - Gap Control

When you knit surfaces to within a tolerance and the distance between two surface edges exceeds the tolerance, the resulting knitting gaps are considered open. In the Knit Surface PropertyManager, under Gap Control, you can modify the knitting tolerance to improve the surface knit, based on resulting gaps.

To open the Knit Surface PropertyManager:

With a part open, click Knit Surface (Surfaces toolbar), or right-click a knit surface feature in the FeatureManager design tree and click Edit Feature .

Knitting tolerance		Controls which gaps are knitted closed and which remain open. Gaps sized below the tolerance are knitted closed.
Show gaps in range		Displays only gaps within the range. Drag the sliders to change the gap range.
Knit all gaps less than Selected_gap_value		When selected, closes the gap and all smaller gaps. Closing a gap increases the tolerance.
Keep all gaps greater than Selected_gap_value		Indicates a closed gap.
Decrease Tolerance to Selected_gap_value		When selected after right-clicking a closed gap , decreases the Knitting tolerance to the gap value. Gaps of value larger than the selected gap are opened and smaller gaps remain closed.
Increase Tolerance to Selected_gap_value		When selected after right-clicking an open gap , increases the Knitting tolerance to the gap value. Gaps of value smaller than the selected gap are closed and larger gaps remain open.
Zoom to Selection		When selected after right-clicking a listed gap, zooms in on the gap in the graphics area.
Gap		When selected from the gap list, indicates the gap on the part. The value of the gap is the maximal separation.