Hide Table of Contents

Converting PolyLines

Use the ConvertPolyLine command to convert lightweight PolyLines to heavyweight PolyLines and vice versa.

Lightweight PolyLines are optimized PolyLines compared to old-format, heavyweight PolyLines.

If you receive drawing files that originated in applications which do not support lightweight PolyLines or if you reopen legacy drawings, you may want to convert old-format PolyLines to lightweight PolyLines. On the contrary, you can convert the other way around, if you need to supply drawing files to use in applications that do not support lightweight PolyLines.

In the Properties palette, you can view the type of a selected PolyLine. It can be either PolyLine (for lightweight PolyLines), 2D PolyLine (for old-format PolyLines), or 3D PolyLine.

To convert PolyLines:

  1. Do one of the following:
    • On the ribbon, click Home > Modify > Convert PolyLine.
    • On the menu, click Modify > Entity > Convert PolyLine.
    • Type ConvertPolyLine.
  2. Specify Heavy or Light as the target format.
  3. Specify the PolyLine entities to convert and press Enter.

    Entities of other types are ignored.

    The command reports the number of converted PolyLine entities.

  Note: You cannot convert 3D PolyLines. To convert Lines or Arcs to PolyLines, use the EditPolyLine command.

Access

Command: ConvertPolyLine

Ribbon: Home > Modify > Convert PolyLine

Menu: Modify > Entity > Convert PolyLine

Related Topics

Editing PolyLines

Exploding Blocks, PolyLines, Hatches, and Dimensions

Constructing PolyLines



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Converting PolyLines
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: 2020 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.62