SpeedPak PropertyManager To open the SpeedPak PropertyManager on the ConfigurationManager tab: Under Configurations, right-click an existing configuration and click Add SpeedPak. Under Configurations, right-click an existing SpeedPak configuration and click Edit SpeedPak. Include Select faces, bodies, reference geometry, sketches, and curves you need for mating and dimensioning. All others are visible, but not selectable. Faces to Include Lists the faces you select in the graphics area. Bodies to Include Lists the bodies you select in the graphics area. Reference Geometry, Sketches, and Curves to Include Lists the reference geometry, sketches, and curves you select in the graphics area. Geometry Quick Include Exterior bodies only Includes only exterior bodies in the SpeedPak. All Views Selects items for Quick Include without limiting by view orientation. Select Views Enables option to select all components that are visible from specific view orientations. Enable Quick Include Enables the Quick Include options for faster selection of bodies. Bodies to Include (slider) Move the slider between More and Less to select bodies. Options Remove ghost graphics Shows only faces, bodies, reference geometry, sketches, and curves that are active and available in the SpeedPak configuration. All others are hidden, which further reduces memory requirements and improves performance. Add Rebuild on Save Mark Applies the Rebuild on Save mark to the configuration. The configuration generates the full data set the next time you save the document. The data rebuilds and saves every time you save the document. Parent topicSpeedPak Creating a SpeedPak Inserting a SpeedPak Disabling the SpeedPak Graphics Circle Editing a SpeedPak Updating SpeedPaks Opening Assemblies Containing SpeedPak Subassemblies Switching Between SpeedPak and Parent Configurations