Welcome
Expand Getting StartedGetting Started
Expand SOLIDWORKS API HelpSOLIDWORKS API Help
Collapse SOLIDWORKS Electrical API HelpSOLIDWORKS Electrical API Help
Expand Getting StartedGetting Started
Collapse ClassesClasses
Expand Class ListClass List
Class Index
Collapse Class HierarchyClass Hierarchy
_DIEwProjectXEvents
Collapse IDispatchIDispatch
IEwAddIn
IEwAPIX
IEwApplicationReactorX
IEwApplicationSettingsX
IEwApplicationX
IEwArchiveEnvironmentX
IEwCableCoreX
IEwCableReferenceManagerX
IEwCableReferenceX
IEwCommandContextX
IEwCommandManagerX
IEwCommandX
IEwDialogAlignPartsParametersSelectorX
IEwDialogLocationSelectorX
IEwDialogMacroSelectorX
IEwDialogManufacturerPartOrderingX
IEwDialogManufacturerPartSelectorX
IEwDialogProgressX
IEwDialogProjectManagerX
IEwDialogResumeX
IEwDialogSummaryX
IEwDialogTaskX
IEwEnvironmentX
IEwInteropFactoryX
IEwLibraryManagerX
IEwLibraryX
IEwLockStringX
IEwManufacturerPartCircuitX
IEwManufacturerPartManagerX
IEwManufacturerPartTerminalX
IEwManufacturerPartX
Expand IEwObjectBaseXIEwObjectBaseX
IEwPointX
IEwProjectAutomaticArrowsX
IEwProjectBookManagerX
IEwProjectCableManagerX
IEwProjectComponentCircuitX
IEwProjectComponentManagerX
IEwProjectComponentTerminalX
IEwProjectEntity3DManagerX
IEwProjectExportDWGFilesX
IEwProjectExportPDMX
IEwProjectExportReportX
IEwProjectFileManagerX
IEwProjectFolderManagerX
IEwProjectFunctionManagerX
IEwProjectGenerateTSDrawingX
IEwProjectHarnessManagerX
IEwProjectLocationManagerX
IEwProjectManagerX
IEwProjectManufacturerPartCircuitX
IEwProjectManufacturerPartManagerX
IEwProjectManufacturerPartTerminalX
IEwProjectManufacturerPartX
IEwProjectNumberDocumentsX
IEwProjectNumberMarksX
IEwProjectNumberWiresX
IEwProjectOptimizeWireOrderX
IEwProjectPrintConfigManagerX
IEwProjectReportManagerX
IEwProjectSnapshotManagerX
IEwProjectSnapshotX
IEwProjectSymbolManagerX
IEwProjectUpdateReplaceDataX
IEwProjectWireManagerX
IEwProjectX
IEwResumeRowX
IEwRibbonControlX
IEwRibbonGroupX
IEwRibbonTabX
IEwRibbonX
IEwRightsManagerX
IEwSymbolCircuitX
IEwSymbolFiltersX
IEwSymbolManagerX
IEwSymbolPointX
IEwSymbolX
IEwTitleBlockManagerX
IEwTitleBlockX
IEwXLSBookX
IEwXLSSheetX
Expand Class MembersClass Members
Expand SOLIDWORKS PDM Professional API HelpSOLIDWORKS PDM Professional API Help
Expand FeatureWorks API HelpFeatureWorks API Help
Expand SOLIDWORKS Costing API HelpSOLIDWORKS Costing API Help
Expand SOLIDWORKS Document Manager API HelpSOLIDWORKS Document Manager API Help
Expand SOLIDWORKS Routing API HelpSOLIDWORKS Routing API Help
Expand SOLIDWORKS Simulation API HelpSOLIDWORKS Simulation API Help
Expand SOLIDWORKS Sustainability API HelpSOLIDWORKS Sustainability API Help
Expand SOLIDWORKS Toolbox API HelpSOLIDWORKS Toolbox API Help
Expand SOLIDWORKS Utilities API HelpSOLIDWORKS Utilities API Help
Expand eDrawings API HelpeDrawings API Help
Expand DraftSight API HelpDraftSight API Help
Expand Lisp Programming BasicsLisp Programming Basics
Expand Lisp Functions OverviewLisp Functions Overview
Expand Lisp Functions ReferenceLisp Functions Reference
Hide Table of Contents
SOLIDWORKS Electrical API  2020.0.5
Electrical API
Public Member Functions | List of all members
IEwSymbolPointX Interface Reference

Use this interface to manage a connection point. More...

Inheritance diagram for IEwSymbolPointX:
[legend]

Public Member Functions

EwErrorCode getNumber (LONG *lNo)
 Get the number of the connection point. More...
 
LONG getEwSymbolCircuitNumber (EwErrorCode *errorCode)
 Get the circuit number of the connection point. More...
 
EwErrorCode setEwSymbolCircuitNumber (LONG lCircuitNo)
 Set the circuit number of the connection point. More...
 
EwPointOrientation getEwPointOrientation (EwErrorCode *errorCode)
 Get the flow direction of the connection point. More...
 
EwErrorCode setEwPointOrientation (EwPointOrientation ewSyConnectionPointFlowDirection)
 Set the flow direction of the connection point. More...
 
DOUBLE getXPos (EwErrorCode *errorCode)
 Get the X coordinate of the connection point. More...
 
EwErrorCode setXPos (DOUBLE dXValue)
 Set the X coordinate of the connection point. More...
 
DOUBLE getYPos (EwErrorCode *errorCode)
 Get the Y coordinate of the connection point. More...
 
EwErrorCode setYPos (DOUBLE dYValue)
 Set the Y coordinate of the connection point. More...
 
DOUBLE getAngle (EwErrorCode *errorCode)
 Get the angle of the connection point. More...
 
EwErrorCode setAngle (DOUBLE dAngle)
 Set the angle of the connection point. More...
 
BSTR getTerminationTypeCode (EwErrorCode *pErrorCode)
 Get the termination type code of the connection point. More...
 
EwErrorCode setTerminationTypeCode (BSTR strTerminationTypeCode)
 Set the termination type code of the connection point. More...
 

Detailed Description

Use this interface to manage a connection point.

Since
2018 SP0

Member Function Documentation

◆ getAngle()

DOUBLE IEwSymbolPointX::getAngle ( EwErrorCode *  errorCode)

Get the angle of the connection point.

Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The angle (degrees)

◆ getEwPointOrientation()

EwPointOrientation IEwSymbolPointX::getEwPointOrientation ( EwErrorCode *  errorCode)

Get the flow direction of the connection point.

Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The flow direction of the connection point

◆ getEwSymbolCircuitNumber()

LONG IEwSymbolPointX::getEwSymbolCircuitNumber ( EwErrorCode *  errorCode)

Get the circuit number of the connection point.

Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The circuit number of the object

◆ getNumber()

EwErrorCode IEwSymbolPointX::getNumber ( LONG *  lNo)

Get the number of the connection point.

Parameters
[out]lNoWill contains the number of the connection point
Returns
errorCode EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ getTerminationTypeCode()

BSTR IEwSymbolPointX::getTerminationTypeCode ( EwErrorCode *  pErrorCode)

Get the termination type code of the connection point.

Since
2019 SP0
Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The termination type code

◆ getXPos()

DOUBLE IEwSymbolPointX::getXPos ( EwErrorCode *  errorCode)

Get the X coordinate of the connection point.

Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The X coordinate

◆ getYPos()

DOUBLE IEwSymbolPointX::getYPos ( EwErrorCode *  errorCode)

Get the Y coordinate of the connection point.

Parameters
[out]errorCodeEwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Returns
The Y coordinate

◆ setAngle()

EwErrorCode IEwSymbolPointX::setAngle ( DOUBLE  dAngle)

Set the angle of the connection point.

Parameters
[in]dAngleThe angle (degrees)
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ setEwPointOrientation()

EwErrorCode IEwSymbolPointX::setEwPointOrientation ( EwPointOrientation  ewSyConnectionPointFlowDirection)

Set the flow direction of the connection point.

Parameters
[in]ewSyConnectionPointFlowDirectionThe flow direction you want to assign to the connection point
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ setEwSymbolCircuitNumber()

EwErrorCode IEwSymbolPointX::setEwSymbolCircuitNumber ( LONG  lCircuitNo)

Set the circuit number of the connection point.

Parameters
[in]lCircuitNoThe circuit number you want to assign to the connection point
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ setTerminationTypeCode()

EwErrorCode IEwSymbolPointX::setTerminationTypeCode ( BSTR  strTerminationTypeCode)

Set the termination type code of the connection point.

Since
2019 SP0
Parameters
[in]strTerminationTypeCodeThe termination type code
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ setXPos()

EwErrorCode IEwSymbolPointX::setXPos ( DOUBLE  dXValue)

Set the X coordinate of the connection point.

Parameters
[in]dXValueThe X coordinate
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred

◆ setYPos()

EwErrorCode IEwSymbolPointX::setYPos ( DOUBLE  dYValue)

Set the Y coordinate of the connection point.

Parameters
[in]dYValueThe Y coordinate
Returns
EwErrorCode enum type, can be:
  • EW_NO_ERROR if no error detected
  • EW_UNDEFINED_ERROR if another error occurred
Generated on Tue Sep 1 2020 17:01:25 for SOLIDWORKS Electrical API by   doxygen 1.8.18


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   SOLIDWORKS Electrical API: IEwSymbolPointX Interface Reference
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2020 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46