Hide Table of Contents
swsStressComponent_e Enumeration

Stress components

.NET Syntax

Visual Basic (Declaration) 
Public Enum swsStressComponent_e 
   Inherits System.Enum
Visual Basic (Usage) 
Dim instance As swsStressComponent_e
C# 
public enum swsStressComponent_e : System.Enum
C++/CLI 
public enum class swsStressComponent_e : public System.Enum

Members

MemberDescription
swsStressComponentCP12 = Contact Pressure
swsStressComponentERR11 = Energy Norm Error
swsStressComponentINT10 = Stress intensity (P1-P3)
swsStressComponentP16 = Normal stress in the first principal direction
swsStressComponentP27 = Normal stress in the second principal direction
swsStressComponentP38 = Normal stress in the third principal direction
swsStressComponentSX0 = Normal stress in the X direction of the selected reference geometry
swsStressComponentSY1 = Normal stress in the Y direction of the selected reference geometry
swsStressComponentSZ2 = Normal stress in the Z direction of the selected reference geometry
swsStressComponentTRI13 = Triaxial stress (P1+P2+P3)
swsStressComponentTXY3 = Shear stress in the Y direction acting in the YZ plane of the selected reference geometry
swsStressComponentTXZ4 = Shear stress in the Z direction acting in the YZ plane of the selected reference geometry
swsStressComponentTYZ5 = Shear stress in the Z direction acting in the XZ plane of the selected reference geometry
swsStressComponentVON9 = von Mises stress
swsStressComponentVONDC100 = Directional von Mises stress; valid only for NComponent of ICWResults::GetMinMaxStressForHarmonic

Remarks

X, Y, Z directions correspond to the reference geometry. The first plane that appears in the FeatureManager design tree is used as the default reference geometry.

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   swsStressComponent_e Enumeration
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2022 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.10