Select the Dynamic Mirror Entities tool to first select the entity about which to mirror, and then sketch the entities to mirror.
If you want to mirror pre-existing sketch entities, select the Mirror Entities tool.
To display this PropertyManager, in an open sketch, click
Dynamic Mirror Entities ![Tool_Dynamic_Mirror_Entities_Sketch.gif](uzq1467919212514.image)
(Sketch toolbar).
You can mirror 2D sketches or 3D sketches on sketch planes.
You can mirror sketches about any these entities:
- Centerlines
- Lines
- Linear model edges
- Linear edges on drawings
To mirror about a linear drawing edge, the sketch entities to mirror must lie within the boundary of the drawing.
As you sketch the entities, they are mirrored about the pre-selected sketch entity. Restrictions to
Dynamic Mirror Entities include:
- Pre-existing sketch entities cannot be mirrored.
- Both the original and the mirrored sketch entities are included in the final result.
![dynamic_mirror_entities_select.gif](yhp1450448073895.image) |
![dynamic_mirror_entities_sketch.gif](unv1478268699535.image) |
Select the sketch
entity about which
to mirror. |
Only the newly sketched
entities are mirrored. |