Hide Table of Contents
swsFOS_NonCompositeCriterion_e Enumeration

Factor of safety criteria for non-composite shells

.NET Syntax

Visual Basic (Declaration) 
Public Enum swsFOS_NonCompositeCriterion_e 
   Inherits System.Enum
Visual Basic (Usage) 
Dim instance As swsFOS_NonCompositeCriterion_e
C# 
public enum swsFOS_NonCompositeCriterion_e : System.Enum
C++/CLI 
public enum class swsFOS_NonCompositeCriterion_e : public System.Enum

Members

MemberDescription
swsFOSNonCompositeCriterion_Automatic4 = See Remarks
swsFOSNonCompositeCriterion_Coulomb3 = Max Normal Stress
swsFOSNonCompositeCriterion_MohrCoulomb2 = Mohr-Coulomb Stress
swsFOSNonCompositeCriterion_Tresca1 = Maximum Shear Stress
swsFOSNonCompositeCriterion_VonMisesHencky0 = Maximum von Mises Stress

Remarks

If you set swsFOSNonCompositeCriterion_Automatic, SOLIDWORKS Simulation selects the most appropriate failure criterion across all element types by applying the following conditions:

  • The default Failure Criterion assigned in the Material dialog box for each material.
  • If you have not assigned a default failure criterion in the Material dialog box, the software assigns the Mohr-Coulomb stress criterion.
  • If you selected Max von Mises or Max shear (Tresca) criterion for a beam material, the software uses the yield strength as allowable stress.
  • If you selected Max normal or Mohr-Coulomb criterion for a beam material, the software uses the tensile strength as the allowable stress.
  • For composite shells, the Tsai-Hill failure criterion is applied.
  • Failure indices for the composite shells failure criteria (Tsai-Hill, Tsai-Wu, and Maximum Stress) are calculated from nodal stresses.
  • For beams, the factor of safety is calculated from: Upper bound axial and bending stress / Yield Strength.
  • For assemblies, the factor of safety is calculated from the un-averaged values of stress components.

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   swsFOS_NonCompositeCriterion_e Enumeration
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2023 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.46