Graphic

This topic explains the options in the Graphic tab.

To access the Graphic, do one of the following:
  • Click Electrical project > Configurations > Project > Graphic.
  • In the dockable panel, right-click an electrical project and click Configuration > Project > Graphic.

Connection Dots

Option Description
Symbol Select the value (Never, Always or only when the symbol is connected to a wire) that you want to use to display the dots placed where a wire connects to a symbol.
Wire Select Display to display the dots placed on wire intersections where two wires form a connection. You can also set the size and color of the dots.

Line Styles

Option Description
Location Defines the line type and color of the location outline.
Function Defines the line type and color of the function outline.
Terminal strips Defines the line type and color of the axis lines used when placing multiple terminals in a schematic.
Cable core Defines the line type and color used in drawings to represent your cable cores.
Bridges Sets the display parameters (color and line style) for the bridges in schematic pages (wire/bridge).
Equipotential conflicts An equipotential conflict occurs when you connect two different equipotentials (equipotentials with a different number). This check box updates the control. You can also choose a line type and color for the line symbol.
Cable label Defines the type and color of the line joining the cable to the cable label.