Insert SpeedPak Instance PropertyManager

You can create a SpeedPak instance by adding an assembly to the model.

To open the Insert SpeedPak Instance PropertyManager, click Insert > Component > Insert SpeedPak Instance.

Select an assembly and specify options in the Insert SpeedPak Instance PropertyManager. Click Next to open the SpeedPak PropertyManager and specify SpeedPak options.

Assembly to Insert

Open Documents Lists previously saved documents that are open. From the list, select an assembly, or click Browse to open an existing document.
Configuration Lists the configurations available in the selected assembly. From the list, select a configuration.

Available when you select a document in Open Documents.

Thumbnail Preview

Displays previews of the selected components under Assembly to Insert.

Options

Graphics preview Displays a preview of the selected component in the graphics area under your pointer.
Show Rotate context toolbar Displays the Rotate context toolbar when you insert a component. You can use the context toolbar to rotate the component around the X, Y, or Z axis.
Fix / float component on insert Specifies the position of a SpeedPak instance as fixed or floating.

Only fix first component

Sets the position as fixed for the first SpeedPak instance. Other components have a floating position.

Fix

Sets the component position as fixed at the selected location in the assembly.

Float

Sets the component position as floating at the selected location in the assembly.