| Accept# |
Threshold of defective units for
accepting the entire lot. The threshold is based on the sampling
plan you selected for this dimension when creating the inspection
sheet. |
| AQL |
Acceptable Quality Level you
select when you choose a sampling plan for this dimension. |
| Balloon
Number |
Unique identifier generated for
each dimension by SOLIDWORKS Inspection. |
| Characteristic Number |
|
| Classification |
Specifies the classification of
defects, such as Major,
Minor, Critical, and Incidental. |
| Comments |
Field to enter comments for the
characteristic. |
| Configuration Name |
SOLIDWORKS configuration
associated with the characteristic. |
| Drawing
Sheet |
SOLIDWORKS drawing sheet on which
the characteristic is located. |
| Drawing
View |
SOLIDWORKS drawing view with which
the characteristic is associated. |
| GUID |
|
| Inspection Method |
Inspection method used to inspect
the attribute. |
| Key |
Indicates whether the characteristic is a key
characteristic.
These are characteristics whose variation has a significant impact
on the quality of the part. |
| Location |
Characteristic's location. |
| Lower
Limit |
Absolute lower limit of the
dimension (nominal value of the dimension minus lower tolerance
value of the dimension). |
| -
Tolerance |
Dimension's lower tolerance
value. |
| Name |
Characteristic's name such as
DetailItem 353 or RD2. |
| Occurrences |
Characteristic's quantity. For
example, if there are 3X or three instances of the characteristic to
inspect. |
| Plus
Tolerance |
Dimension's upper tolerance
value. |
| Operation |
Characteristic's inspection
process. |
| Reference |
Indicates whether the
characteristic is a reference dimension. |
| Reject |
Threshold of defective units for
rejecting the entire lot. The threshold is based on the sampling
plan you selected for this dimension when creating the inspection
sheet. |
| Sample
Size |
Number of units from the lot to
inspect. Based on the sampling plan you selected for this dimension
when creating the inspection sheet. |
| Specification |
Nominal value of the SOLIDWORKS
dimension using a special geometric dimensioning and tolerancing
(GDT) font to represent GDT and other symbols. |
| Specification (Non GDT Font Version) |
Nominal value of the SOLIDWORKS
dimension in numeric value only with no GDT symbols. |
| Sub-Type |
Characteristic's sub-type, such
as length, perpendicularity, position, depth, or diameter. |
| Type |
Characteristic's type, such as
Dimension, GTOL, Note, or Hole Callout. |
| Units |
Units for the dimension's nominal
and tolerance values. |
| Upper
Limit |
Absolute upper limit of the
dimension. Calculated by adding the upper tolerance value of the
dimension to the nominal value of the dimension. |
| Zone |
Characteristic's grid
location. |