|
Field
|
Adds  at the bend in the weld line to indicate that the weld is applied in the field.
|
|
Around
|
Creates a circle  at the bend in the weld line to indicate that the weld is applied all around the contour.
|
|
Other Side
|
Move the arrow from the upper  to the lower  side of the leader.
|
|
Leader anchor
|
Anchor the leader to the specified location on the weld symbol.
|
|
Use multi jog leader
|
Allows you to click in the graphics area several times to create bends for the leader.
|
|
Layer
|
In a drawing with named layers, choose a layer from the list.
|
|
Solder
|
Adds  to the symbol leader.
|
|
Glue
|
Adds  to the symbol leader.
|
|
Weld Text
|
Type the weld dimensions and specifications.
- The box on the left contains the text that appears on the bent leader; the other two boxes contain the text that appears above and below the bent leader.
- Place the cursor in the text box where you want one of the following symbols and click the symbol button.
|
Fillet Weld
|
|
Stagger Check
|
|
Heat
|
|
Not All Around
|
|
Smooth
|
|
Diameter
|
|
Stagger Chain
|
|
Number
|
|
|
SF Symbol
|
To add surface finish information to the symbol:
Under SF Symbol, select Top or Bottom to place the symbol above or below the horizontal leader. Enter the information in the Surface Finish Symbol dialog box, and click OK.
To modify the surface finish information:
Click Details for the side you want to modify.
|
|
Font
|
To specify a font for text and size of symbols:
Clear Use document font and click Font.
|
|
Style
|
For details, see Style. |