Applying Heat Power to the Chips

You apply heat power over the volume of each of the four chips.

1. Click Thermal Loads (Simulation CommandManager) and select Heat Power .
   The Heat Power PropertyManager appears.
2. In the graphics area, click to expand the flyout FeatureManager design tree.
3. Click the chip<1>, chip<2>, chip<3>, and chip<4> icons.
   chip-1, chip-2, chip-3, and chip-4 appear in the Faces, Edges, Vertices, Components for Heat Power box .
4. Under Heat Power, do the following:
   1. Set Unit to SI.
   2. Set Heat Power to 0.2.
5. Click .