Defining Displacement and Frequency Constraints

The maximum resultant displacement should not exceed 0.21 mm. The fundamental frequency should be in the range 260 Hz to 400 Hz.

1. On the MinVolume Design Study tab, in the Constraints section, from the list, select URES.
   The sensor appears in the Constraints section. This pre-defined sensor tracks the value of resultant displacement.
2. For URES, select Is less than.
3. For Max, type 0.21 mm.
   The program automatically selects the ReadyStatic study to run and track the sensor's value
4. On the MinVolume Design Study tab, in the Constraints section, from the list, select Frequency.
   The sensor appears in the Constraints section. This sensor tracks the value of the fundamental frequency.
5. For Frequency, select Is between.
6. For Min, type 260 Hz and for Max, type 400 Hz.
   The program automatically selects the ReadyFrequency study to run and tracks the sensor's value. You have now defined three constraints.