Listing Vertical Displacement at the Interface

You list the vertical displacement UY at the interface.

  1. Right-click Displacement2 (-Y disp-) in the Results folder and select Probe .
  2. In the PropertyManager under Options, select On selected entities.
  3. Under Results:
    1. Select the face of the back cantilever for Faces, Edges, or Vertices .
      Use Select Other if necessary.
    2. Click Update.
    Under Summary, the average vertical displacement is listed as -0.32754 inches.
  4. Click PM_OK.gif.
  5. Save the assembly document.