Connecting the Arms Connect the central arm to the upper arm. Select any sketch entity on Upper Arm-1, drag the block close to Central Arm-1, and then click . Click Zoom to Area (View toolbar), zoom in to the top of Central Arm-1 and the point on Upper Arm-1. Press Esc to clear the view tool, select the point on the construction line of Upper Arm-1, and drag it until it is coincident to the center of the arc from Central Arm-1. Click this animation to play it or to reset it. A coincident relationship is added to the Upper Arm PropertyManager. Click in the graphics area to close the PropertyManager and click Zoom to Fit (View toolbar). Click File > Save to This PC. Parent topicSketch Blocks Previous topic Connecting the Arm and Base Next topic Testing the Arms