Modifying the Extruded Hole Forming Tool

Next, you modify the extruded hole forming tool.

1. In the Design Library, navigate to forming tools\embosses.
2. Right-click extruded hole and click Open .
3. In the FeatureManager design tree, right-click Boss-Extrude1 and click Edit Sketch .
4. In the graphics area, double-click the diameter dimension, 2.
5. In the Modify dialog box, enter 8mm, and click .
6. Close the Dimension PropertyManager if it is open, and exit the sketch.
7. Save and close extruded hole.sldftp.