Completing the Planes

  1. With Plane1 selected, in the CommandManager, click the Features tab and click Reference Geometry > Plane > .
  2. Add another offset plane at a distance of 25mm.
    The offset plane becomes Plane 2.
  3. Click OK .
    Another way to create an offset plane is to copy an existing plane.
  4. Hold down Ctrl, select an edge of Plane2 in the graphics area, and drag to a location in front of Plane2.

    Another offset plane, Plane3, is created.

  5. To set the offset distance for the new plane, set Offset distance to 40 in the PropertyManager.
  6. Click OK .
    Your graphics area should look like this image.