Hide Table of Contents
swsCableEndEditErrors_e Enumeration

Cable editing errors

.NET Syntax

Visual Basic (Declaration) 
Public Enum swsCableEndEditErrors_e 
   Inherits System.Enum
Visual Basic (Usage) 
Dim instance As swsCableEndEditErrors_e
C# 
public enum swsCableEndEditErrors_e : System.Enum
C++/CLI 
public enum class swsCableEndEditErrors_e : public System.Enum

Members

MemberDescription
swsCableErrCode_InadequateEntitiesSelection24 = Insufficient number of entities selected for valid linkage rod definition
swsCableErrCode_InvalidCoAxialSelection6 = Selected concentric cylindrical faces or edges (for shells or surface bodies) at both ends must not be coaxial
swsCableErrCode_InvalidLibraryMaterialDetails19 = Setting the material library failed due to invalid library path/name or non-available material name
swsCableErrCode_InvalidMaterialSourceType16 = Material source type must be cjhosen from swsMaterialSourceType_e
swsCableErrCode_InvalidNonCoAxialSelection5 = Selected concentric cylindrical faces or edges (for shells or surface bodies) at one end must be coaxial
swsCableErrCode_InvalidNonConcentricSelection7 = Select concentric cylindrical edges from shell or surface body
swsCableErrCode_InvalidSelection4 = Select cylindrical face(s) or a single vertex for solid bodies or edge(s) for shells or surface bodies
swsCableErrCode_InvalidUnitType15 = Unit type must be chosen from swsUnit_e
swsCableErrCode_NoActiveDoc1 = Active document not found
swsCableErrCode_NoActiveStudy2 = Active study not found
swsCableErrCode_OffsetOptionNotAvailable9 = Offset direction and values are not available for vertex selection
swsCableErrCode_OutOfRangeAxialStrengthValue25 = 0 <= valid value of Axial Strength < 1e+36
swsCableErrCode_OutOfRangeDensity23 = 0 < valid value of Density < 1e+36
swsCableErrCode_OutOfRangePreLoadForceValue26 = 0 <= valid value of Pre Load Force < 1e+36
swsCableErrCode_OutOfRangeShearModulus21 = 0 < valid value of Shear Modulus < 1e+36
swsCableErrCode_OutOfRangeThermalCoefficient22 = 0 < valid value of Thermal Coefficient < 1e+36
swsCableErrCode_OutOfRangeYoungsModulus20 = 0 < valid value of Young's Modulus < 1e+36
swsCableErrCode_SetLibraryMaterialNA18 = Setting the material library is allowed when Material Source Type = swsMaterial_Library
swsCableErrCode_SetMaterialPropertyNA17 = Setting the material property is allowed when Material Source Type = swsMaterial_Custom
swsCableErrCode_SetOperationNotSupported3 = You must call BeginEdit to start editing
swsCableErrCode_Successful0
swsCableErrCode_ZeroDiameterValue14

See Also



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   swsCableEndEditErrors_e Enumeration
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2026 PR1

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.53